Removing
| CAUTION | Before beginning repairs on the electrical system: Switch off all electrical consumers. Switch ignition off and remove ignition key. |
- Unclip rear headliner trim and left/right D-pillar trim
Refer to 72 - SEAT - FRAMES
- Carefully lower headliner at rear slightly in order to access antenna cables etc..
Scheme 69
- Open foam insulator surrounding the three antenna cable connections -arrows- and separate connections.
Scheme 70
- Remove nut -2- and remove antenna.
Install in reverse order of removal, noting the following
Scheme 71
- Ensure gasket is properly oriented in relation to relief areas -arrows- on antenna base
- Ensure stress free routing of antenna cables -1- through nut -2-.
- Apply contact grease in area where nut/serrated washer contacts roof sheet metal.