Removal & Installation
Remove window regulator. See WINDOW REGULATOR. Remove eccentric disc by removing bolt from reverse side. (Scheme 1) Remove window motor-to-regulator mounting bolts. Remove motor from regulator assembly. To install, reverse removal procedure.
Removing & Installing Power Window Motor. Scheme 1
Remove 6 bolts from window regulator and push window glass upward. (Scheme 2) Secure glass in upward position. Disconnect wiring harness form power window motor. Remove bolts securing window regulator. Raise window regulator until lugs disengage, then pull window regulator out downward through opening. To install, reverse removal procedure.
