Home/Volkswagen/Beetle/Volkswagen Beetle A4 (1997-2005)/Repair manual/Front Suspension (Hatchback)/STABILIZER BAR

Contents

Wiring diagrams Section: Front Suspension (Hatchback)

VEHICLE LEVEL SENSOR WITH AUTOMATIC HEADLIGHT VERTICAL AIM CONTROL

LONGITUDINAL MEMBER THREADS, SERVICING

SUBFRAME

CONTROL ARM

PENDULUM SUPPORT

STABILIZER BAR

WHEEL BEARING HOUSING

STRUT

DRIVE AXLE

LEFT FRONT LEVEL CONTROL SYSTEM SENSOR -G78

BALL JOINT, CHECKING

BALL JOINT

CONTROL ARM BONDED RUBBER BUSHINGS

SUBFRAME BONDED RUBBER BUSHINGS

FRONT WHEEL BEARING, HUB AND INNER RACE, WITH WHEEL BEARING HOUSING INSTALLED

COIL SPRING

DRIVE AXLE WITH CV JOINT AND TRIPLE ROLLER JOINTS AAR 2000 AND AAR 2900

OUTER CV JOINT

INNER CV JOINT

DRIVE AXLE WITH TRIPLE ROLLER JOINT AAR 3300I

TIGHTEN 12 POINT NUT TO 200 Nm AND RELEASE A HALF A ROTATION

DRIVE AXLE WITH CV JOINT

GREASE QUANTITIES AND TYPES

DRIVE AXLE WITH TRIPLE ROLLER JOINT AAR 2000

DRIVE AXLE WITH TRIPLE ROLLER JOINT AAR 2900

All sections

STABILIZER BAR Volkswagen Beetle A4

Front Suspension (Hatchback)

STABILIZER BAR

Connection	Thread	Nm
To subframe, refer to item: 27	M8 x 18	25
To coupling rod, refer to item: 15	M10	15 + 90° ( 1 / 4 turn) (1)
Coupling rod to control arm, refer to item: 14	M10 x 50	15 + 90° ( 1 / 4 turn) (1)
(1) Always replace

(1)	Always replace