ALL WINDOWS & POWER DOOR LOCKS INOPERATIVE
Check for defective fuse (ALT, DOOR, GAUGE, POWER), power main relay, ignition switch, door lock control relay, driver's side power window switch, theft deterrent system or wiring harness.
ALL WINDOWS INOPERATIVE, BUT POWER DOOR LOCKS OPERATE
Check for defective fuse (GAUGE, POWER), ignition switch, door lock control relay, driver's side power window switch, power main relay or wiring harness.
LOCK SWITCH INOPERATIVE
Check driver's side power window lock switch.
WINDOW LOCK ILLUMINATION DOES NOT OPERATE
Check driver's side power window switch.
ONE-TOUCH FEATURE IS INOPERATIVE
Check driver's side power window switch.
ONE WINDOW DOES NOT OPERATE
Check driver's side power window switch for appropriate window, power window switch, power window motor and wiring harness for appropriate window.
WINDOW DOES NOT OPERATE WITH KEY OFF
Check for defective fuse (DOME, ECU-IG, GAUGE, POWER), ignition switch, door courtesy switch or wiring harness.
Note. For door lock control relay testing, see DOOR LOCKS - POWER article. For ignition switch testing, see appropriate STEERING COLUMN SWITCHES article.
POWER WINDOW MAIN RELAY
- Remove power window main relay, located behind instrument panel, in junction block No. 7 on right side of steering column on.
- Using an ohmmeter, check continuity between terminals No. 1and 2. Continuity should exist. (Scheme 6) Apply battery voltage to terminal No. 1 and ground terminal No. 2. Continuity should exist at terminals No. 3 and 5. If relay does not test as described, replace power window main relay.
