Home/Toyota/Tercel/Toyota Tercel L50 (1994-1997)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul: Specifications Toyota Tercel L50

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Accessory Drive Pulley-To-Crankshaft Pulley Bolt14 (19)
Crankshaft Pulley Bolt114 (155)
ECT Sensor(1)
EGR Pipe-To-EGR Valve Nut30 (41)
EGR Pipe-To-Intake Manifold Nut22 (30)
EGR Valve Retaining Nut22 (30)
Front (Timing Belt End) Engine Mount Through-Bolt54 (73)
Front (Timing Belt End) Engine Mount-To-Mounting Bracket Bolt47 (64)
Fuel Inlet Hose-To-Fuel Rail Union Bolt22 (30)
Fuel Outlet Line-To-Fuel Pump Mounting Bracket22 (30)
Fuel Rail-To-Cylinder Head Bolt14 (19)
Knock Sensor33 (45)
Main Oxygen Sensor-To-Exhaust Manifold32 (43)
Sub-Oxygen Sensor-To-Exhaust Pipe32 (43)
Throttle Body Bolt/Nut15 (20)
INCH Lbs. (N.m)
Camshaft Position Sensor Bolt71 (8.0)
Crankshaft Position Sensor Bolt71 (8.0)
Fuel Cut-Off Valve Retainer Screw13 (1.5)
Fuel Pressure Regulator Bolt71 (8.0)
Fuel Pump Mounting Bracket-To-Fuel Tank Bolt30 (3.4)
Ignition Coil Bolt75 (8.5)
PNP Switch Retaining Bolt48 (5.4)
PNP Switch Retaining Nut61 (6.9)
(1) Information not available at time of publication.
(1)Information not available at time of publication.

TORQUE SPECIFICATIONS

See also:
WIRING DIAGRAMS
ADJUSTMENTS