Home ReviewsRefund
Home/Toyota/Tacoma/Toyota Tacoma I facelift (2000-2004)/Repair manual/Automatic Transmission Shift Interlock Systems/Lexus LS430
Contents Wiring diagrams Section: Automatic Transmission Shift Interlock Systems All sections

Lexus LS430 Toyota Tacoma I facelift

Automatic Transmission Shift Interlock Systems 2 illustrations

Lexus LS430

  1. Disconnect the solenoid connector. Using an ohmmeter, measure the resistance between terminals No. 3 and 4. (Scheme 400) Resistance should be 12-17 ohms. If resistance value is not as specified, replace the solenoid. See «KEY INTERLOCK SOLENOID»(ref-144214-S37162429022002091700000) under REMOVAL & INSTALLATION.
  2. Momentarily supply battery positive voltage and ground at terminals. (Scheme 401) Ensure an operating noise can be heard from the solenoid. If the solenoid does not operated, replace the solenoid. See «KEY INTERLOCK SOLENOID»(ref-144214-S37162429022002091700000) under REMOVAL & INSTALLATION.

Scheme 400

Scheme 400
Scheme 400

Scheme 401

Scheme 401
Scheme 401