TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Air Intake Chamber Bolt/Nut | 13 (18) | |
| ECT Sensor | 15 (20) | |
| EGR Gas Temperature Sensor | 15 (20) | |
| EGR Pipe Nut | ||
| Nut At Clamp On EGR Pipe | (1) | |
| Nut At End Of EGR Pipe | 14 (19) | |
| EGR Valve Retaining Nut | 14 (19) | |
| Fuel Crossover Pipe Union Bolt | 25 (34) | |
| Fuel Inlet Pipe Union Bolt | 25 (34) | |
| Heated Oxygen Sensor Nut | 15 (20) | |
| Intake Air Connector Bolt/Nut | 13 (18) | |
| Intake Manifold Bolt/Nut | 13 (18) | |
| Intake Manifold Support Brace Bolt | 13 (18) | |
| Knock Sensor | 29 (39) | |
| Throttle Body Bolt/Nut | 13 (18) | |
| INCH Lbs. (N.m) | ||
| Airflow Meter Retaining Bolt | 61 (6.9) | |
| Camshaft Position Sensor Bolt | 69 (7.8) | |
| Coolant Bypass Pipe-To-Cylinder Block Bolt/Nut | 75 (8.5) | |
| Crankshaft Position Sensor Bolt | 69 (7.8) | |
| Fuel Pressure Regulator Bolt | 71 (8.0) | |
| Fuel Pump Mounting Bracket-To-Fuel Tank Bolt | 30 (3.4) | |
| Fuel Rail-To-Intake Manifold Bolt | 115 (13.0) | |
| Ignition Coil Bolt | 69 (7.8) | |
| PNP Switch Retaining Bolt | 115 (13.0) | |
| PNP Switch Retaining Nut | 61 (6.9) | |
| Upper Timing Belt Cover Bolt | 80 (9.0) | |
| (1) Tighten nuts to 71 INCH lbs. (8.0 N.m). | ||
| (1) | Tighten nuts to 71 INCH lbs. (8.0 N.m). |
TORQUE SPECIFICATIONS
See also:
• WIRING DIAGRAMS - 3.4L
• ADJUSTMENTS - 3.4L