TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Vane Pump Assy At Pump Bracket | 44 | 449 | 32 | |
| Vane Pump Assy At Adjust Strut | 44 | 449 | 32 | |
| Generator Bracket No. 2 At Generator Assy | 58 | 591 | 43 | |
| Fan Belt Adjusting Slider At Generator Assy | 18 | 184 | 13 | |
| Front Wheel | 103 | 1,050 | 76 | |
| Cylinder Head Cover At Cylinder Head | 8.0 | 80 | 71 in.lbf | |
| Engine Wire Harness At Cylinder Head Cover | 8.4 | 85 | 74 in.lbf | |
| Engine Wire Harness Protector At Cylinder Head Cover | 8.4 | 85 | 74 in.lbf | |
| Ignition Coil Assy At Cylinder Head Cover | 8.0 | 80 | 71 in.lbf | |
| Intake Air Surge Tank At Intake Manifold | 28 | 286 | 21 | |
| Surge Tank Stay No. 2 At Intake Air Control Valve Assy | 20 | 199 | 14 | |
| Surge Tank Stay No. 2 At Cylinder Head | 20 | 199 | 14 | |
| Surge Tank Stay No. 1 At Intake Air Surge Tank | 20 | 199 | 14 | |
| Surge Tank Stay No. 1 At Cylinder Head | 20 | 199 | 14 | |
| Engine Hanger No. 1 At Intake Air Surge Tank | 20 | 199 | 14 | |
| Engine Hanger No. 1 At Cylinder Head | 20 | 199 | 14 | |
| PS Pressure Tube At Engine Hanger No. 1 | 7.8 | 80 | 69 in.lbf | |
| Emission Control Valve Set At Emission Control Valve Bracket | 8.0 | 82 | 71 in.lbf | |
| V-Bank Cover At Cylinder Head Cover | 7.9 | 81 | 70 in.lbf | |
| Engine Hanger No. 2 At Cylinder Head | 20 | 199 | 14 | |
| Engine Oil Pressure Switch Assy At Cylinder Block | 15 | 153 | 11 | |
| Generator Bracket No. 1 At Cylinder Block | 58 | 591 | 43 | |
| Pump Bracket At Cylinder Head | 32 | 326 | 24 | |
| Engine Mounting Bracket RH At Cylinder Block | 54 | 551 | 40 | |
| Manifold Stay No. 2 At Cylinder Block | 49 | 500 | 36 | |
| Drive Shaft Bearing Bracket (2WD) At Cylinder Block | 64 | 650 | 47 | |
| Engine Mounting Bracket RR (4WD) At Cylinder Block | 64 | 653 | 47 | |
| Engine Mounting Insulator RH At Engine Mounting Bracket RH | 95 | 969 | 70 | |
| Engine Mounting Insulator LH At Automatic Transaxle Assy | 95 | 969 | 70 | |
| Engine Mounting Insulator FR At Engine Mounting Bracket FR | 87 | 887 | 64 | |
| Engine Mounting Insulator RR (4WD) At Engine Mounting Bracket RR | 75 | 765 | 55 | |
| Rack & Pinion Power Steering Gear Assy (4WD) At Front Frame Assy | 70 | 714 | 52 | |
| Stabilizer Bar Front (4WD) At Front Frame Assy | 17 | 173 | 13 | |
| Adjust strut At Engine mounting bracket RH | 44 | 449 | 32 | |
| Frame Side Rail Plate Sub-Assembly At Front Frame Assy (See REPLACEMENT ) | ||||
| Bolt A | 85 | 867 | 63 | |
| Bolt B | 32 | 329 | 24 | |
| Nut | 32 | 329 | 24 | |
| Front Suspension Member Brace Rear X Front Frame Assy (See REPLACEMENT ) | ||||
| Bolt C | 85 | 867 | 63 | |
| Bolt D | 32 | 329 | 24 | |
| Nut | 32 | 329 | 24 | |
| Camshaft Sub-Gear At Main Gear | 5.4 | 55 | 48 in.lbf | |
| Engine Rear Oil Seal Retainer At Cylinder Block | 8.0 | 82 | 71 in.lbf | |
| Oil Pump Assy At Cylinder Block (See OVERHAUL ) | ||||
| Bolt A | 8.0 | 82 | 71 in.lbf | |
| Bolt B | 20 | 199 | 14 | |
| Bolt C | 43 | 439 | 32 | |
| Crankshaft Position Sensor At Oil Pump Assy | 8.0 | 80 | 71 in.lbf | |
| Oil Pan Baffle Plate At Oil Pan Sub-Assy | 8.0 | 82 | 71 in.lbf | |
| Oil Pan Sub-Assy At Cylinder Block (See OVERHAUL ) | ||||
| 10 mm head | 8.0 | 82 | 71 in.lbf | |
| 12 mm head | 20 | 199 | 14 | |
| Oil Strainer Sub-Assy At Oil Pan Sub-Assy | 8.0 | 82 | 71 in.lbf | |
| Oil Pan Sub-Assy No. 2 At Oil Pan Sub-Assy | 8.0 | 82 | 71 in.lbf | |
| Oil Pan Drain Plug At Oil Pan Sub-Assy No. 2 | 45 | 459 | 33 | |
| Water Inlet Housing At Cylinder Block | 8.0 | 82 | 71 in.lbf | |
| Cylinder Head At Cylinder Block | ||||
| 12 Pointed Head 1st | 54 | 550 | 40 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Recessed Head | 19 | 189 | 14 | |
| Oil Control Valve Filter At Cylinder Head | 45 | 459 | 33 | |
| Cylinder Head Cover Rear At Cylinder Head | 10 | 102 | 7 | |
| Camshaft Timing Gear Assy (VVT-I) At Camshaft | 150 | 1,530 | 111 | |
| Camshaft Bearing Cap At Cylinder Head | 16 | 163 | 12 | |
| Timing Belt Plate At Oil Pump Assy | 8.0 | 82 | 71 in.lbf | |
| Water Pump Assy At Cylinder Block | 8.0 | 82 | 71 in.lbf | |
| Oil Level Gage Guide At Cylinder Block | 8.0 | 82 | 71 in.lbf | |
| Oil Filter Union At Cylinder Block | 30 | 306 | 22 | |
| Timing Belt Idler Bracket At Cylinder Block | 28 | 286 | 21 | |
| Timing Belt No. 3 Cover X Cylinder Head | 8.5 | 87 | 76 in.lbf | |
| Camshaft Timing Pulley At Camshaft | 125 | 1,275 | 92 | |
| Timing Belt Idler Sub-Assy No. 2 At Timing Belt Idler Bracket | 43 | 438 | 32 | |
| Timing Belt Idler Sub-Assy No. 1 At Cylinder Block | 34 | 347 | 25 | |
| Chain Tensioner Assy No. 1 At Oil Pump Assy | 27 | 280 | 20 | |
| Engine Mounting Bracket RH At Cylinder Block | 28 | 286 | 21 | |
| Timing Belt No. 2 Cover At Timing Belt No. 3 Cover | 8.5 | 87 | 75 in.lbf | |
| Timing Belt No. 1 Cover At ON Pump Assy | 8.5 | 87 | 75 in.lbf | |
| Crankshaft Pulley At Crankshaft | 220 | 2,250 | 162 | |
| VVT Sensor At Cylinder Head | 8.0 | 82 | 71 in.lbf | |
| Camshaft Timing Oil Control Valve Assy At Cylinder Head | 8.0 | 82 | 71 in.lbf | |
| Spark Plug At Cylinder Head | 25 | 250 | 18 | |
| Generator Bracket No. 2 At Engine Mounting Bracket RH | 28 | 286 | 21 | |
| Engine Mounting Stay No. 2 RH At Engine Mounting Bracket RH | 64 | 653 | 47 | |
| Engine Moving Control Rod (See TIMING BELT ) | ||||
| 12 mm head | 23 | 235 | 17 | |
| 14 mm head | 64 | 653 | 47 | |
| Exhaust Manifold Sub-Assy RH (2WD) At Cylinder Head | 49 | 500 | 36 | |
| Exhaust Manifold Converter Sub-Assy (4WD) At Cylinder Head | 49 | 500 | 36 | |
| Manifold Stay At Exhaust Manifold Sub-Assy RH (2WD) | 34 | 347 | 25 | |
| Manifold Stay At Exhaust Manifold Converter Sub-Assy (4WD) | 34 | 347 | 25 | |
| Manifold Stay At Automatic Transaxle Assy | 34 | 347 | 25 | |
| Exhaust Manifold Heat Insulator No. 1 At Exhaust Manifold Sub-Assy RH (2WD) | 8.5 | 87 | 75 in.lbf | |
| Exhaust Manifold Heat Insulator No. 1 At Exhaust Manifold Converter Sub-Assy (4WD) | 8.5 | 87 | 75 in.lbf | |
| Water Outlet At Cylinder Head | 15 | 153 | 11 | |
| Intake Manifold At Cylinder Head | 15 | 153 | 11 | |
| Ground Cable At Intake Manifold | 8.4 | 86 | 74 in.lbf | |
| Wire Harness Clamp Bracket At Cylinder Head | 5.4 | 55 | 48 in.lbf | |
| Ground Cable At Cylinder Head | 5.4 | 55 | 48 in.lbf | |
| Exhaust Manifold Converter Sub-Assy No. 2 At Cylinder Head | 49 | 500 | 36 | |
| Exhaust Manifold Heat Insulator No. 2 At Exhaust Manifold Converter Sub-Assy No. 2 | 8.5 | 87 | 75 in.lbf | |
| Manifold Converter Insulator No. 3 At Exhaust Manifold Converter Sub-Assy No. 2 | 8.5 | 87 | 75 in.lbf | |
| Exhaust Pipe Assy FR At Exhaust Manifold Converter Sub-Assy No. 2 | 62 | 632 | 46 | |
| Drive Plate & Ring Gear Sub-Assy | 83 | 846 | 61 | |
| W/Head Straight Screw Plug No. 1 At Cylinder Head | 44 | 449 | 32 | |
| W/Head Straight Screw Plug No. 2 At Cylinder Head | 44 | 449 | 32 | |
| Connecting Rod Cap At Connecting Rod | ||||
| 1st | 25 | 250 | 18 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Main Bearing Cap At Cylinder Block | ||||
| 12 Pointed Head 1st | 22 | 224 | 16 | |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 6 Pointed Head | 27 | 275 | 20 | |
| Cylinder Block W/Head Straight Screw No. 1 Plug At Cylinder Block | 30 | 306 | 22 | |
| Cylinder Block W/Head Straight Screw No. 2 Plug At Cylinder Block | 30 | 306 | 22 | |
| Cylinder Block W/Head Straight Screw No. 3 Plug At Cylinder Block | 50 | 510 | 37 | |
| Water Seal Plate At Cylinder Block | 18 | 184 | 13 | |
| Cylinder Block Water Drain Cock Sub-Assy At Cylinder Block | 39 | 398 | 29 | |
ENGINE MECHANICAL TORQUE SPECIFICATIONS
See also:
• REPLACEMENT
• TIMING BELT