TORQUE SPECIFICATIONS
| Part Tightened | N.m | Kgf.cm | Ft.lbf | |
|---|---|---|---|---|
| Oil Pressure Switch At Cylinder Block Sub-Assy | 15 | 153 | 11 | |
| Oil Pump Assy At Cylinder Block (See REPLACEMENT ) | ||||
| Bolt A | 8.0 | 82 | 71 in.lbf | |
| Bolt B | 20 | 199 | 14 | |
| Bolt C | 43 | 439 | 32 | |
| Crankshaft Position Sensor At Oil Pump Assy | 8.0 | 80 | 71 in.lbf | |
| Oil Pan Sub-Assy At Cylinder Block (See REPLACEMENT ) | ||||
| 10 mm head | 8.0 | 82 | 71 in.lbf | |
| 12 mm head | 20 | 199 | 14 | |
| 14 mm head | 37 | 379 | 27 | |
| Oil Strainer Sub-Assy At Oil Pan Sub-Assy | 8.0 | 82 | 71 in.lbf | |
| Oil Pan Sub-Assy No. 2 At Oil Pan Sub-Assy | 8.0 | 82 | 71 in.lbf | |
| Engine Mounting Bracket RH At Cylinder Block | 54 | 551 | 40 | |
| Engine Mounting Bracket RH At PS Pump Bracket | 44 | 449 | 32 | |
| Engine Mounting Insulator RH At Engine Mounting Bracket RH | 95 | 969 | 70 | |
| Engine Mounting Insulator RH At Front Frame Assy | 87 | 887 | 64 | |
| Engine Mounting Insulator FR At Engine Mounting Bracket FR | 87 | 887 | 64 | |
| Engine Mounting Insulator FR At Front Frame Assy | 52 | 530 | 38 | |
| Engine Mounting Insulator RR (4WD) At Front Frame Assy | 52 | 530 | 38 | |
| Compressor Mounting Bracket No. 1 At Cylinder Block | 25 | 250 | 18 | |
| Compressor & Magnetic Clutch At Compressor Mounting Bracket No. 1 | 25 | 250 | 18 | |
| Generator Belt Adjusting Bar At Cylinder Block (See REPLACEMENT ) | ||||
| Nut A | 43 | 438 | 32 | |
| Bolt B | 18 | 184 | 13 | |
| Bolt C | 8.4 | 85 | 74 in.lbf | |
| Oil Pump Rotor Set At Oil Pump Assembly | 10 | 105 | 8 | |
| Oil Pan Drain Plug At Oil Pan Sub-Assy No. 2 | 45 | 459 | 33 | |
LUBRICATION SYSTEM TORQUE SPECIFICATIONS
See also:
• REPLACEMENT