SERVICE DATA
| Rear differential | Carrier oil seal drive in depth | 2.0 ± 0.3 mm (0.079 ± 0.012 in.) | |
|---|---|---|---|
| Side gear shaft oil seal drive in depth | 0 ± 0.5 mm (0 ± 0.019 in.) | ||
| Companion flange vertical runout | 0.10 mm (0.0039 in.) or less | ||
| Companion flange horizontal runout | 0.10 mm (0.0039 in.) or less | ||
| Ring gear runout | 0.07 mm (0.0028 in.) or less | ||
| Side gear backlash | 0.05 - 0.20 mm (0.0020 - 0.0079 in.) | ||
| Drive pinion to ring gear backlash | 0.13 - 0.18 mm (0.0051 - 0.0071 in.) | ||
| Drive pinion preload (at starting) | New bearing | 1.1 - 1.7 N.m (11 - 17 kgf.cm, 9.6 - 14.8 in.lbf) | |
| Reused bearing | 0.6 - 0.9 N.m (6 - 9 kgf.cm, 5.2 - 7.8 in.lbf) | ||
| Total preload (Drive pinion preload plus) | 0.3 - 0.5 N.m (3 - 5 kgf.cm, 2.6 - 4.3 in.lbf) | ||
| Right and left side gear shafts standard distance | 242 mm (9.528 in.) | ||
| Side gear thrust washer thickness | Mm (in.) | 0.93 - 0.97 (0.0366 - 0.0382) | |
| 0.98 - 1.02 (0.0386 - 0.0402) | |||
| 1.03 - 1.07 (0.0406 - 0.0421) | |||
| 1.08 - 1.12 (0.0425 - 0.0441) | |||
| 1.13 - 1.17 (0.0445 - 0.0461) | |||
| 1.18 - 1.22 (0.0465 - 0.0480) | |||
| 1.23 - 1.27 (0.0484 - 0.0500) | |||
| 1.28 - 1.32 (0.0504 - 0.0520) | |||
| 1.33 - 1.37 (0.0524 - 0.0539) | |||
| 1.38 - 1.42 (0.0543 - 0.0559) | |||
| Drive pinion plate washer thickness | Mm (in.) | 2.26 - 2.28 (0.0890 - 0.0898) | |
| 2.29 - 2.31 (0.0902 - 0.0909) | |||
| 2.32 - 2.34 (0.0913 - 0.0921) | |||
| 2.35 - 2.37 (0.0925 - 0.0933) | |||
| 2.38 - 2 40 (0.0937 - 0.0945) | |||
| 2.41 - 2.43 (0.0949 - 0.0957) | |||
| 2.44 - 2.46 (0.0961 - 0.0969) | |||
| 2.47 - 2.49 (0.0972 - 0.0980) | |||
| 2.50 - 2.52 (0.0984 - 0.0992) | |||
| 2.53 - 2.55 (0.0996 - 0.1004) | |||
| 2.56 - 2.58 (0.1008 - 0.1016) | |||
| 2.59 - 2.61 (0.1020 - 0.1028) | |||
| 2.62 - 2.64 (0.1031 - 0.1039) | |||
| 2.65 - 2.67 (0.1043 - 0.1051) | |||
| 2.68 - 2.70 (0.1055 - 0.1063) | |||
| Rear differential | Side gear shaft plate washer thickness | Mm (in.) | 2.21 - 2.23 (0.0870 - 0.0878) |
| 2.24 - 2.26 (0.0882 - 0.0890) | |||
| 2.27 - 2.29 (0.0894 - 0.0902) | |||
| 2.30 - 2.32 (0.0906 - 0.0913) | |||
| 2.33 - 2.35 (0.0917 - 0.0925) | |||
| 2.36 - 2.38 (0.0929 - 0.0937) | |||
| 2.39 - 2.41 (0.0941 - 0.0949) | |||
| 2.42 - 2.44 (0.0953 - 0.0961) | |||
| 2.45 - 2.47 (0.0965 - 0.0972) | |||
| 2.48 - 2.50 (0.0976 - 0.0984) | |||
| 2.51 - 2.53 (0.0988 - 0.0996) | |||
| 2.54 - 2.56 (0.1000 - 0.1008) | |||
| 2.57 - 2.59 (0.1012 - 0.1020) | |||
| 2.60 - 2.62 (0.1024 - 0.1031) | |||
| 2.63 - 2.65 (0 1035 - 0 1043) | |||
| 2.66 - 2.68 (0.1047 - 0.1055) | |||
| 2.69 - 2.71 (0.1059 - 0.1067) | |||
| 2.72 - 2.74 (0.1071 - 0.1079) | |||
| 2.75 - 2.77 (0.1083 - 0.1091) | |||
| 2.78 - 2.80 (0.1094 - 0.1102) | |||
| 2.81 - 2.83 (0.1106 - 0.1114) | |||
| 2.84 - 2.86 (0.1118 - 0.1126) | |||
| 2.87 - 2.89 (0.1130 - 0.1138) | |||
| 2.90 - 2.92 (0.1142 - 0.1150) | |||
| 2.93 - 2.95 (0.1154 - 0.1161) | |||
| 2.96 - 2.98 (0.1165 - 0.1173) | |||
| 2.99 - 3.01 (0.1177 - 0.1185) | |||
| 3.02 - 3.04 (0.1189 - 0.1197) | |||
| 3.05 - 3.07 (0.1201 - 0.1209) | |||
| 3.08 - 3.10 (0.1213 - 0.1220) | |||
| 3.11 - 3.13 (0.1224 - 0.1232) | |||
| 3.14 - 3.16 (0.1236 - 0.1244) | |||
| 3.17 - 3.19 (0.1248 - 0.1256) | |||
| 3.20 - 3.22 (0.1260 - 0.1268) |
Differential Service Data