| Application | Ft. Lbs. (N.m) |
|---|
| A/F Sensor | (1) |
| Air Intake Chamber Bolt/Nut | 32 (43) |
| Air Intake Chamber Support Brace Bolt | 15 (20) |
| Coolant Housing Bolt/Nut | 11 (15) |
| ECT Sensor | (1) |
| EGR Gas Temperature Sensor | 15 (20) |
| Engine Hanger Bolt | 29 (39) |
| Fuel Pulsation Damper | 24 (33) |
| Heated Oxygen Sensor | 32 (43) |
| Intake Air Control Valve Nut | 11 (15) |
| Intake Manifold Bolt/Nut | (2) 11 (15) |
| Knock Sensor | 29 (39) |
| No. 1 Fuel Pipe-To-Fuel Rail Bolt | 24 (33) |
| No. 1 Fuel Pipe-To-Intake Manifold Clamp Bolt | 15 (20) |
| Power Steering Pressure Switch | 15 (20) |
| Suspension Upper Brace Nut | 59 (80) |
| Throttle Body Bolt/Nut | 14 (19) |
| INCH Lbs. (N.m) |
| Camshaft Position Sensor Bolt | 71 (8.0) |
| Control Lever Nut | 112 (12.7) |
| Crankshaft Position Sensor Bolt | 71 (8.0) |
| EGR Pipe Nut | 106 (12.0) |
| EGR Position Sensor-To-EGR Valve Nut | (1) |
| EGR Valve Retaining Nut | 106 (12.0) |
| Fuel Pump Retaining Plate-To-Fuel Tank Bolt | 31 (3.5) |
| Fuel Rail-To-Intake Manifold Bolt | 89 (10.1) |
| Ignition Coil Bolt | 71 (8.0) |
| PNP Switch Retaining Bolt | 48 (5.4) |
| PNP Switch Retaining Nut | 61 (6.9) |
| TP Sensor Retaining Screw | 18 (2.0) |
| (1) Information is not available from manufacturer. (2) Tighten bolts/nuts to specification in sequence. (Схема №19) |
| (1) | Information is not available from manufacturer. |
| (2) | Tighten bolts/nuts to specification in sequence. (Схема №19) |
TORQUE SPECIFICATIONS (CAMRY)
