| Accessory Drive Belt Idler Pulley Bolt | 27 (37) |
| Accessory Drive Belt Tensioner Bolt/Nut | 12 (16) |
| A/C Compressor Bolt | 36 (49) |
| Camshaft Bearing Cap Bolt | (1) |
| Camshaft Sprocket Bolt | 80 (109) |
| Connecting Rod Bolt |
| Step 1 | 18 (24) |
| Step 2 | Additional 90 Degrees |
| Coolant Inlet Housing Assembly Bolt | 13 (18) |
| Cooling Fan Bracket Bolt/Nut |
| Large Bolt/Nut | 15 (20) |
| Small Bolt/Nut | 13 (18) |
| Cooling Fan-To-Cooling Fan Bracket Nut | 16 (22) |
| Crankshaft Pulley Bolt | 181 (245) |
| Crossmember Bolt | 37 (50) |
| Cylinder Head Bolt (2) |
| Step 1 | 24 (33) |
| Step 2 | Additional 90 Degrees |
| Step 3 | Additional 90 Degrees |
| Drive Shaft Flange Bolt/Nut |
| Front Drive Shaft | 59 (80) |
| Rear Drive Shaft | 78 (106) |
| Engine Hanger Bolt | 27 (37) |
| Engine Mount-To-Frame Bolt/Nut | 22 (30) |
| Exhaust Manifold Nut | 32 (43) |
| Flywheel/Drive Plate Bolt |
| Step 1 | 36 (49) |
| Step 2 | Additional 90 Degrees |
| Front Coolant By-Pass Joint Nut | 13 (18) |
| Front Exhaust Pipe-To-Center Exhaust Pipe Bolt/Nut | 30 (41) |
| Front Exhaust Pipe-To-Exhaust Manifold Nut | 46 (62) |
| Front Fuel Pipe-To-Fuel Rail Union Bolt | 29 (39) |
| Fuel Pulsation Damper | 29 (39) |
| Fuel Rail-To-Lower Intake Manifold Nut | 13 (18) |
| Generator Mounting Bolt/Nut | 29 (39) |
| Lower Intake Manifold-To-Cylinder Head Bolt/Nut | 13 (18) |
| Main Bearing Cap Bolt (3) |
| Step 1 | 20 (27) |
| Step 2 | Additional 90 Degrees |
| No. 1 Idler Pulley Bolt | 25 (34) |
| No. 1 Oil Pan Bolt/Nut |
| 10-mm Bolt Head | (4) |
| 12-mm Bolt Head | 21 (29) |
| No. 2 Idler Pulley Bolt | 25 (34) |
| No. 2 Oil Pan Drain Plug | 29 (39) |
| No. 2 Timing Belt Cover Bolt | 12 (16) |
| Oil Cooler Union Bolt | 51 (69) |
| Oil Filter Mounting Bracket Bolt/Nut | 13 (18) |
| Oil Pump-To-Cylinder Block Bolt |
| 14-mm Bolt Head | 22 (30) |
| All Others | 11 (15) |
| Oxygen Sensor-To-Front Exhaust Pipe Nut | 15 (20) |
| Power Steering Pump Mounting Bolt | 13 (18) |
| Rear Coolant By-Pass Joint Nut | 13 (18) |
| Spark Plug | 13 (18) |
| Stabilizer Bar Link-To-Lower Control Arm Bolt | 38 (52) |
| Stabilizer Bar Link-To-Stabilizer Bar Nut | 18 (24) |
| Stabilizer Bar Mount-To-Frame Bolt | 13 (18) |
| Timing Belt Tensioner Bolt | 19 (26) |
| Torque Converter Bolt | 35 (47) |
| Transmission Mount-To-Crossmember Nut | 55 (74) |
| Transmission-To-Cylinder Block Bolt |
| Large Bolt | 53 (72) |
| Small Bolt | 27 (37) |
| Upper Intake Manifold-To-Lower Intake Manifold Bolt | 13 (18) |
| Water Pump Bolt | 15 (20) |
| Water Pump Nut | 13 (18) |
| Water Pump Stud Bolt | 13 (18) |
| INCH Lbs. (N.m) |
| Baffle Plate Bolt/Nut | 66 (7.5) |
| Camshaft Position Sensor Bolt & Stud Bolt | 66 (7.5) |
| Crankshaft Position Sensor Bolt | 58 (6.6) |
| Cooling Fan Shroud Bolt | 43 (5.0) |
| Front Fuel Pipe Clamp Bolt | 66 (7.5) |
| Fuel Return Pipe-To-Fuel Rail Clamp Bolt | 66 (7.5) |
| Ignition Coil Bolt | 66 (7.5) |
| Intake Manifold Cover Bracket Bolt | 66 (7.5) |
| No. 2 Oil Pan Bolt/Nut | 66 (7.5) |
| No. 3 Timing Belt Cover Bolt/Nut | 66 (7.5) |
| Oil Pump Body Cover Screw | 88 (9.9) |
| Oil Pump Pick-Up Tube Bolt/Nut | 66 (7.5) |
| Rear Oil Seal Housing-To-Cylinder Block Bolt | 71 (8.0) |
| Timing Belt Rear Plate Bolt | 66 (7.5) |
| Valve Cover Bolt | 53 (6.0) |
| (1) Tighten bolts to specification in sequence. (Схема №308) Tighten bolt "C" to 69 INCH lbs. (7.8 N.m). Tighten all other bolts to 12 ft. lbs. (16 N.m). (2) Tighten bolts to specification in sequence. (Схема №309) (3) Tighten bolts to specification in sequence. (Схема №310) (4) Tighten to 66 INCH lbs. (7.5 N.m). |
