Replace Requirements
In the following cases, replace the seat belt pretensioner.
- If the seat belt pretensioner has been activated.
- If the seat belt pretensioner has been found to be faulty in troubleshooting.
- If the front seat outer belt has been found to be faulty during the check in items 1-(b) or 2-(b).
- If the front seat outer belt has been dropped.
Note. Never use seat belt pretensioner from another vehicle. When replacing parts, replace them with new parts. Make sure that the front seat outer belt is installed to the specified torque. If the front seat outer belt has been dropped, or there are cracks, dents or other defects in the case or connector, replace the front seat outer belt with a new one. When installing the front seat outer belt, take care that the wiring does not interfere with other parts and is not pinched between other parts.
Scheme 226
- Other front seat outer belts, Install retractor of front seat outer belt : Install the retractor of front seat outer belt with the 2 bolts. Torque: 42 N.m (430 kgf.cm, 31 ft..lbf) . Connect the pretensioner connector.
- Install lower center pillar garnish : Install the lower center pillar garnish. Install the front seat outer belt floor anchor. Torque: 42 N.m (430 kgf.cm, 31 ft..lbf)
- Install rear door opening trim weatherstrip .
- Install rear door scuff plate .
- Install front door opening trim weatherstrip .
- Install front door scuff plate .
