REMOVAL & INSTALLATION
Note. When battery is disconnected on Sienna, power sliding doors will need to be initialized. See SLIDING DOOR INITIALIZATION PROCEDURE (SIENNA) in COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION. When battery is disconnected on Celica, power moon roof may need to be initialized for proper operation. See SUN ROOF INITIALIZATION (CELICA) in COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION.
Removal & Installation (Land Cruiser, LX 470 & Sequoia)
- Disconnect negative battery cable. Drain engine coolant. Rotate belt tensioner counterclockwise to release tension on belt and remove drive belt. Remove splash shield from underneath engine. Remove radiator reservoir tank and radiator.
- Using Spanner Wrench (09960-10010), to keep power steering pump pulley from rotating, remove power steering pump pulley retaining nut. Remove power steering pump pulley. Remove generator mounting bolts and generator. To install, reverse removal procedure. Tighten bolts to specifications. See «TORQUE SPECIFICATIONS»(ref-121767-S00079784812001090500000) .
Removal & Installation (All Others)
Disconnect negative battery cable. Remove generator mounting bolts. Remove generator. To install, reverse removal procedure. Tighten generator bolts to specification. See TORQUE SPECIFICATIONS .