Home ReviewsRefund
Home/Toyota/RAV4/Toyota RAV4 I (1994-2000)/Repair manual/Mechanical/Reassembly & Installation: Overview
Contents Wiring diagrams Section: Mechanical All sections

Reassembly & Installation: Overview Toyota RAV4 I

Mechanical ~163 words
  1. To reassemble, reverse disassembly procedure. Ensure reference marks (dot area) on rotors face toward oil pump body cover, away from oil pump housing.
  2. Using hammer and Oil Seal Installer (SST 09226-10010), install NEW crankshaft front oil seal (if removed) until oil seal surface is even with oil pump housing. Coat lip of oil seal with grease.
  3. Install NEW oil pump oil seal (if removed) until oil seal surface is even with oil pump body cover. Coat lip of oil seal with grease.
  4. Install oil pump body cover using NEW "O" ring. Install and tighten oil pump body cover bolts to specification. See «TORQUE SPECIFICATIONS»(ref-49472-S03922354322001011500000) . Using NEW gasket, install oil pump on cylinder block using NEW gasket.
  5. Ensure 2 longest oil pump-to-cylinder block bolts are located in lowest outside holes nearest to oil pan flange on each side of oil pump. Tighten oil pump-to-cylinder block bolts to specification. See «TORQUE SPECIFICATIONS»(ref-49472-S03922354322001011500000) . To install remaining components, reverse removal procedure.

More articles — Reassembly & Installation