TORQUE SPECIFICATION
| Part tightened | N.m | Kgf.cm | Ft.lbf |
|---|---|---|---|
| Oil pump cover x MG2 assembly | 5.5 | 56 | 49 in..lbf |
| Transaxle oil drain plug | 39 | 400 | 29 |
| Hybrid transaxle assembly x Engine | 33 | 332 | 24 |
| Coolant drain plug x MG1 assembly | 39 | 400 | 29 |
| Screw plug x MG1 assembly | 55 | 561 | 41 |
| Set plug x MG2 assembly | 39 | 400 | 29 |
| Filler plug x MG2 assembly | 39 | 400 | 29 |
| MG1 assembly x MG2 assembly | 25 | 250 | 18 |
| Oil strainer x MG2 assembly | 7.9 | 81 | 70 in..lbf |
| Motor water jacket cover x MG2 assembly | 5.5 | 56 | 49 |
| Housing tube x MG1 assembly | 15 | 155 | 11 |
| Detent spring set bolt | 9.8 | 100 | 86 in..lbf |
| Parking cover x MG2 assembly | 5.5 | 56 | 49 in..lbf |
| Parking shaft cover x MG2 assembly | 5.5 | 56 | 49 in..lbf |
| Oil pump cover x plug | 7.4 | 75 | 65 in..lbf |
| Power cable cover x MG1 assembly | 4.8 | 48 | 42 in..lbf |
| Mounting bracket x MG2 assembly | 52 | 530 | 38 |
| Shift lever assembly x Steering column | 8 | 80 | 71 in..lbf |
| Generator cable x Converter & inverter. | 5.5 | 56 | 49 in..lbf |
| Generator cable x MG1 cable cover | 5.8 | 59 | 51 in..lbf |
| Generator cable x MG1 assembly | 8.5 | 87 | 75 in..lbf |
| Connector x MG1 assembly | 5.8 | 59 | 51 in..lbf |
| Connector x MG2 assembly | 5.8 | 59 | 51 in..lbf |
| Transmission case cover x MG2 assembly | 7.0 | 71 | 62 in..lbf |
| Shift control actuator x MG2 assembly | 16 | 160 | 12 |
| Shift lever assy x Body | 12 | 122 | 9 |
| Engine hanger x Hybrid transaxle assembly | 38 | 387 | 28 |
| Stay x Hybrid transaxle assembly | 9.0 | 92 | 80 in..lbf |
| Engine mounting bracket No.3 x Hybrid transaxle assembly | 52 | 530 | 38 |
| Housing side cover x Hybrid transaxle assembly | 32 | 326 | 23 |
| Engine mounting insulator x Hybrid transaxle assembly | 80 | 816 | 59 |
| Earth wire x Hybrid transaxle assembly | 9.0 | 92 | 80 in..lbf |
| Set plug x MG2 assembly | 39 | 400 | 29 |
| Screw plug x MG2 assembly | 13 | 130 | 9 |
| Nut x Baring | 280 | 2860 | 207 |
TORQUE SPECIFICATION OF HYBRID TRANSAXLE