SERVICE DATA
| Condition | Rod Operation |
|---|---|
| Cold (below approx. 71°C (160°F)) --> Warmed up (approx. 80°C (176°F) or more) | Rod gradually extends as the temperature rises. |
EXHAUST HEAT RECIRCULATION SYSTEM
| Condition | Specified Condition |
|---|---|
| Approximately 20°C (68°F) | 2.32 to 2.59 kohms |
| Approximately 80°C (176°F) | 0.310 to 0.326 kohms |
TEMPERATURE SWITCH
| Condition | Specified Condition |
|---|---|
| Standard valve opening temperature | 80 to 84°C (176 to 183°F) |
| Standard valve lift | 10 to 14 mm (0.394 to 0.551 in.) at 95°C (203°F) |
THERMOSTAT
| Item | Condition | Specified Condition |
|---|---|---|
| Cooling fan motor | At 20°C (68°F) | 4.7 to 8.7 A at 12 V |
| No. 2 Cooling fan motor | At 20°C (68°F) | 4.7 to 8.7 A at 12 V |
COOLING FAN MOTOR
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage is not applied between terminals 1 and 2 | 10 kohms or higher |
| 3 - 5 | Battery voltage is applied between terminals 1 and 2 | Below 1 ohms |
COOLING FAN RELAY
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 4 | Battery voltage is not applied between terminals 1 and 2 | Below 1 ohms |
| 3 - 4 | Battery voltage is applied between terminals 1 and 2 | 10 kohms or higher |
| 3 - 5 | Battery voltage is not applied between terminals 1 and 2 | 10 kohms or higher |
| 3 - 5 | Battery voltage is applied between terminals 1 and 2 | Below 1 ohms |
NO. 2 COOLING FAN RELAY
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 5 | Battery voltage is not applied between terminals 1 and 2 | 10 kohms or higher |
| 3 - 5 | Battery voltage is applied between terminals 1 and 2 | Below 1 ohms |
NO. 3 COOLING FAN RELAY
| Item | Tester Connection | Specified Condition |
|---|---|---|
| Radiator reservoir cap | For brand-new cap | 94 to 122 kPa (1.0 to 1.2 kgf/cm 2 , 13.5 to 17 psi) |
| For using cap | 79 kPa (0.8 kgf/cm 2 , 11.4 psi) |
RESERVE TANK CAP