SERVICE DATA
| Fuel pressure | Standard fuel pressure | 304 to 343 kPa (3.1 to 3.5 kgf/cm 2 , 44 to 50 psi) |
|---|---|---|
| Fuel pressure : at fuel pressure remains for 5 minutes after engine has stopped | Standard fuel pressure | 147 kPa (1.5 kgf/cm 2 , 21 psi) or more |
| Fuel injector assembly | Standard resistance | 11.6 to 12.4 ohms at 20°C (68°F) |
| Injection volume | 47 to 58 cc (2.9 to 3.5 cu.in.) per 15 seconds | |
| Difference between each fuel injector | 11 cc (0.6 cu.in.) or less | |
| Standard leakage | 1 drop or less per 24 minutes | |
| Fuel pump | Standard resistance | 0.2 to 3.0 ohms at 20°C (68°F) |
| Fuel sender gauge assembly | Standard resistance | 12.0 to 18.0 ohms(Float level F) |
| 12.0 to 415.0 ohms(Float level E to F) | ||
| 405.0 to 415.0 ohms(Float level E) |
TORQUE SPECIFICATIONS
| Part Tightened | N*m | Kgf*cm | Ft.*lbf | |
|---|---|---|---|---|
| Fuel delivery pipe x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Fuel delivery pipe x Cylinder head sub-assembly | 10 | 102 | 7 | |
| Fuel tank assembly x Body | 14 | 146 | 11 | |
| No. 1 fuel tank filler pipe support x Body | 34 | 347 | 25 | |
| No. 1 fuel tank protector sub-assembly x Body | 5.4 | 55 | 48 in.*lbf | |
| No. 4 floor heat insulator x Body | Nut A | 5.5 | 56 | 49 in.*lbf |
| Nut B | 5.4 | 55 | 48 in.*lbf | |
| Rear wheel (for LH Side) | 103 | 1050 | 76 | |