STARTER SPECIFICATIONS
| Application | In. (mm) | ||
|---|---|---|---|
| Brush Length | |||
| Standard | .610 (15.5) | ||
| Minimum | .394 (10) | ||
| Commutator | |||
| Diameter | |||
| Minimum | 1.142 (29) | ||
| Standard | 1.181 (30) | ||
| Runout | .0020 (.05) | ||
| Undercut Depth | |||
| Standard | .024 (.6) | ||
| Minimum | .008 (.2) | ||
| Contact Plate Maximum Depth Of Wear | 0.35 (.9) | ||
| Spring Load | |||
| Installed Minimum | 2.7 Lb. (1.2 Kg.) | ||
| Installed Standard | 4.0-5.3 Lb. (1.79-2.41 Kg.) | ||
STARTER SPECIFICATIONS
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Starter Mounting Bolt | 27 (37) |
| Terminal Nuts | 13 (17) |
| INCH Lbs. (N.m) | |
| Clutch Housing Screws | 52 (5.9) |
| End Cover Bolts | 26 (3) |
| Magnetic Switch End Cover Bolts | 23 (2.5) |
| Starter Through Bolt | 52 (5.9) |
| Terminal Cap Nuts | 52 (5.9) |
| Through Bolts | 52 (5.9) |
TORQUE SPECIFICATIONS