Introduction: Other Toyota Matrix E140

CUSTOMIZE PARAMETERS

HINT

The following items can be customized.

Note. When the customer requests a change in a function, first make sure that the function can be customized. Be sure to make a note of the current settings before customizing. When troubleshooting a function, first make sure that the function is set to the default setting.

1. POWER DOOR LOCK CONTROL SYSTEM MAIN BODY Tester Display Default Content Setting Unlock Key Twice ON Function that unlocks only driver door when driver door key cylinder is turned to UNLOCK once, and unlocks all doors when it is turned to UNLOCK twice. For OFF setting, turning it once unlocks all doors. ON / OFF Auto Lock/Shift ON Function that locks all doors when shift lever is moved to P from any other position with engine running and all doors closed. ON / OFF Auto Unlock/Shift ON Function that unlocks all doors when shift lever is moved to P from any other position while the ignition switch is ON. ON / OFF All Unlock/Open-Close OFF Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch to ON. ON / OFF
2. WIRELESS DOOR LOCK CONTROL SYSTEM WIRELESS DOOR LOCK Display (Item) Default Content Setting Wireless Control ON ON/OFF of wireless door lock function. ON/OFF Hazard Answer Back ON When LOCK switch on transmitter is pressed, all hazard warning lights illuminate once. When UNLOCK switch is pressed, all hazard warning lights illuminate twice. ON/OFF Wireless Buzzer Resp ON Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch is pressed ON/OFF Open Door Warning ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds. ON/OFF Auto Lock Time 60s This function controls amount of time from unlocking doors to automatic re-locking function. 30s/60s/120s Unlock 2 Operation ON Function that unlocks driver door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON/OFF Panic Function ON This function operates the theft deterrent system when PANIC is pressed and held for 0.8 seconds or more. ON/OFF Wireless Auto Lock ON Function to control automatic relocking of doors after unlocking with wireless door lock function. ON/OFF
3. THEFT DETERRENT SYSTEM SECURITY Tester Display Default Content Setting Passive Mode OFF Passive Mode is a function that switches the theft deterrent system from the arming preparation state to the armed state 30 seconds after the key is removed from the key cylinder and all doors, engine hood and luggage compartment door are closed, even if the doors are not locked by wireless or door key lock operation. In Passive Mode, if the following operations are not performed within 14 seconds after a door is opened during armed state, the theft deterrent system will judge that condition as a theft and switch to the alarm sounding state. Unlock any door by key or wireless operation Turn the ignition switch to ON Open the luggage compartment door by key or wireless operation ON / OFF Warning by Glass Sen ON Function that turns the glass breakage sensor on/off this function is only effective for vehicles with glass breakage sensor. ON / OFF Entry Delay Time 14 s Function that changes entry delay time (time before warning starts) for Passive Mode. 0 s / 14 s / 30 s
4. LIGHTING SYSTEM ILLUMINATED ENTRY Tester Display Default Content Setting Lighting Time 15 s Changes the lighting time of the personal light*1, center room light and rear room light after closing all of the doors. (It will quickly fade out in case of turning the ignition switch to ON) 7.5 s / 15 s / 30 s I/L when ACC OFF ON Lights up the personal*1, center room light and rear room light when the ignition switch is turned from ACC or ON to off. ON / OFF I/L ON W/Door Key Unlock*2 ON Lights up the personal light*1, center room light and rear room light when the doors are unlocked using mechanical key or door control transmitter. ON / OFF *1: w/ Sliding Roof *2: w/ Power Door Lock Control System
5. METER / GAUGE SYSTEM COMBINATION METER Tester Display Default Content Setting Key Remind Volume Large Function to change the volume of the key reminder buzzer Large, Medium, Small Key Remind Sound Slow Function to change the frequency of the key reminder buzzer Fast, Normal, Slow Driver Side Seatbelt Warning Buzzer* On Function to change the seat belt warning buzzer On, Off Front Passenger Side Seatbelt Warning Buzzer On Function to change the seat belt warning buzzer On, Off HINT: *: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more.

INITIALIZATION

1. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED Replacement Part Necessary Procedure Effect / Inoperative Function when Necessary Procedures are not Performed See ECM Vehicle Identification Number (VIN) registration MIL comes on Refer to «REGISTRATION»(ref-427310-S07185870842011101200000) for 2AZ-FE Refer to «REGISTRATION»(ref-427311-S10056099922011101200000) for 2ZR-FE ECU communication ID registration Engine start Refer to «REGISTRATION»(ref-427312-S22461380832011101200000) Automatic transaxle assembly* Engine assembly* ECM* Reset memory Large shift shock The deterioration of fuel efficiency Refer to «INITIALIZATION»(ref-427313-S03722492042011101200000) for U140F Refer to «INITIALIZATION»(ref-427314-S02101675402011101200000) for U250E Refer to «INITIALIZATION»(ref-427315-S00195076952011101200000) for U341E Tire pressure warning ECU Register transmitter IDs Initialize tire pressure warning system When DTC detection conditions of "transmitter ID not received" DTC are met, TPWS indicator blinks for 1 minute, and then illuminates. Tire pressure monitoring function Refer to «INITIALIZATION»(ref-427316-S40187042842011101200000) for initialization Refer to «REGISTRATION»(ref-427316-S05414387132011101200000) for registration Tire pressure warning valve and transmitter Register transmitter IDs Initialize tire pressure warning system When DTC detection conditions of "transmitter ID not received" DTC are met, TPWS indicator blinks for 1 minute, and then illuminates. Tire pressure monitoring function of replaced wheel Brake actuator assembly (Skid control ECU) Perform yaw rate and acceleration sensor zero point calibration Slip indicator light comes on VSC disabled or malfunctioning Refer to «CALIBRATION»(ref-427317-S18014307702011101200000) for 2AZ-FE Refer to «CALIBRATION»(ref-427318-S09034538162011101200000) for 2ZR-FE Yaw rate and acceleration sensor Clear zero point calibration data Perform yaw rate and acceleration sensor zero point calibration Slip indicator light comes on VSC disabled or malfunctioning Power steering ECU Power steering link assembly Perform rotation angle sensor initialization and torque sensor zero point calibration P/S warning light comes on EPS control Refer to «CALIBRATION»(ref-427319-S00005652892011101200000) Transponder key ECU Key code registration ECU communication ID registration Engine start Refer to «REGISTRATION»(ref-427312-S22461380832011101200000) Key Key code registration Engine start Door control transmitter Door control receiver Refer to wireless door lock control system "REGISTRATION" procedures Wireless door lock control system Refer to «REGISTRATION»(ref-427320-S05736062842011101200000) Front seat cushion assembly (w/ occupant classification ECU, occupant classification sensor) Perform zero point calibration Sensitivity check Occupant classification system Passenger airbag ON/OFF indicator Airbag system (Front passenger side) Seat belt warning system (Front passenger side) Refer to «INITIALIZATION»(ref-427321-S33519877022011101200000) Sliding roof drive gear sub-assembly (Sliding roof ECU) Sliding roof housing Perform sliding roof drive gear reset Automatic open/close function of roof glass Jam protection function Operation function after ignition switch off Refer to «INITIALIZATION»(ref-427322-S13815487902011101200000) *: for U140F, U250E, U341E Automatic Transaxle

GLOSSARY OF SAE AND TOYOTA TERMS

This glossary lists all SAE-J1930 terms and abbreviations used in this service information in compliance with SAE recommendations, as well as their TOYOTA equivalents.