Contents Section: Application All sections

Engine/vin ID Toyota Land Cruiser 70

Application 12 illustrations ~246 words

GENERAL SPECIFICATIONS & VIN IDENTIFICATION

ModelBodyEngineEngineID (1)Fuel System (2)Ignition System
AvalonMCX3.0L V6 (1MZ-FE)GSFI(3) DIS
CamrySXV2.2L 4-Cyl. (5S-FE)S(4)Magnetic
MCV3.0L V6 (1MZ-FE)GSFI(3) DIS
CelicaAT1.8L 4-Cyl. (7A-FE)AMFIMagnetic
ST2.2L 4-Cyl. (5S-FE)S(4)Magnetic
CorollaAE1.6L 4-Cyl. (4A-FE)AMFIMagnetic
AE1.8L 4-Cyl. (7A-FE)ASFIMagnetic
Land CruiserFZJ4.5L 6-Cyl. (1FZ-FE)DSFIMagnetic
MR2SW2.0L 4-Cyl. (3S-GTE) (5)SSFIMagnetic
SW2.2L 4-Cyl. (5S-FE) (6)SMFIMagnetic
PaseoEL1.5L 4-Cyl. (5E-FE)EMFI(7)
PickupRN2.4L 4-Cyl. (22R-E)RMFIMagnetic
VZN3.0L V6 (3VZ-E)VMFIMagnetic
PreviaTCR2.4L 4-Cyl. (2TZ-FE) (8)AMFIMagnetic
TCR2.4L 4-Cyl. (2TZ-FZE) (9)AMFIMagnetic
SupraJZA3.0L 6-Cyl. (2JZ-GE) (6)JSFIMagnetic
JZA3.0L 6-Cyl. (2JZ-GTE) (5)JSFI(3) DIS
TacomaRZN2.4L 4-Cyl. (2RZ-FE)UMFIMagnetic
RZN2.7L 4-Cyl. (3RZ-FE)UMFIMagnetic
VZN3.4L V6 (5VZ-FE)VSFI(3) DIS
TercelEL1.5L 4-Cyl. (5E-FE)EMFI(3) DIS
T100RCK2.7L 4-Cyl. (3RZ-FE)UMFIMagnetic
VCK3.4L V6 (5VZ-FE)VSFI(3) DIS
4RunnerRN2.4L 4-Cyl. (22R-E)RMFIMagnetic
VZN3.0L V6 (3VZ-E)VMFIMagnetic
(1) Engine may be identified by Vehicle Identification Number (VIN) or number stamped on engine block. (Scheme 1)and (Scheme 2). VIN is located on stamped plate on left side of instrument panel. (2) Fuel injection system may be a Sequential Multiport Fuel Injection (SFI) system or a Multiport Fuel Injection (MFI) system. Note application listed for fuel system ID. (3) Application uses a Distributorless Ignition System (DIS). (4) On Calif. emission vehicles, a Sequential Multiport Fuel Injection (SFI) system is used. On all other models, a Multiport Fuel Injection (MFI) system is used. (5) This is the turbo engine. (6) This is the non-turbo engine. (7) On Calif. emission vehicles, a Distributorless Ign. System (DIS) is used. On all other models, a magnetic ign. system is used. (8) This is the non-supercharged engine. (9) This is the supercharged engine.
(1)Engine may be identified by Vehicle Identification Number (VIN) or number stamped on engine block. (Scheme 1)and (Scheme 2). VIN is located on stamped plate on left side of instrument panel.
(2)Fuel injection system may be a Sequential Multiport Fuel Injection (SFI) system or a Multiport Fuel Injection (MFI) system. Note application listed for fuel system ID.
(3)Application uses a Distributorless Ignition System (DIS).
(4)On Calif. emission vehicles, a Sequential Multiport Fuel Injection (SFI) system is used. On all other models, a Multiport Fuel Injection (MFI) system is used.
(5)This is the turbo engine.
(6)This is the non-turbo engine.
(7)On Calif. emission vehicles, a Distributorless Ign. System (DIS) is used. On all other models, a magnetic ign. system is used.
(8)This is the non-supercharged engine.
(9)This is the supercharged engine.

1995 MODEL COVERAGE

EXAMPLE VIN

Numbers preceding the explanations in the legend below refer to the sequence of characters as listed on VIN identification label.

  1. J T 3 A C 1 1 R 3 S 1 1 1 9 4 3 1
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

VIN DEFINITION BREAKDOWN

  1. 1 - Indicates Nation of Origin.
  2. 2 - Indicates Manufacturer.
  3. 3 - Indicates Vehicle Type.
  4. 4 - Indicates Engine Type and Make.
  5. 5 - Indicates Vehicle Line.
  6. 6 - Indicates Model Change Code (Car); Indicates Drive Train (Truck).
  7. 7 - Indicates Series Type (Car); Indicates Model (Truck).
  8. 8 - Indicates Body Type/Restraint System (Car); Indicates Series (Truck).
  9. 9 - Indicates Check Digit.
  10. 10 - Indicates Model Year.
  11. 11 - Indicates Assembly Plant.
  12. 12-17 - Indicates Plant Sequential Number.

MODEL/YEAR VIN CODE APPLICATION

VIN CodeModel Year
P1993
R1994
S1995

MODEL YEAR VIN CODE APPLICATION

ENGINE CODE EXPLANATION

A typical engine code may appear as follows

  1. 7M-GTE

The following is an explanation of this engine code

  1. 7 - Engine Generation Code
  2. M - Engine Model Code & VIN VDS Code
  3. C - U.S. specifications. (Engines without "C" may also meet U.S. specifications.)
  4. E - Fuel Injection
  5. F - Twin Camshafts
  6. G - Twin Camshafts
  7. L - Transverse Engine
  8. T - Turbocharged

Scheme 1

Scheme 1: ENGINE CODE LOCATION

Scheme 2

Scheme 2

Scheme 3

Scheme 3

Scheme 4

Scheme 4

Scheme 5

Scheme 5

Scheme 6

Scheme 6

Scheme 7

Scheme 7

Scheme 8

Scheme 8

Scheme 9

Scheme 9

Scheme 10

Scheme 10

Scheme 11

Scheme 11

Scheme 12

Scheme 12