Contents Section: Specifications All sections

Engine Controls - Specifications - 1.6L: Specifications Toyota Corolla VIII рестайлинг

CAPACITIES

CAUTIONSome transaxles require that differential be filled separately from transaxle. A separate quantity of lubricant is required for differential. See FLUID CAPACITIES table.
Application(1) Quantity
Crankcase (Includes Filter)3.2 Qts. (3.0L)
Cooling System (Includes Heater)
A/T6.2 Qts. (5.9L)
M/T6.3 Qts. (6.0L)
Manual Transaxle (SAE 75W-90/API GL-5)2.0 Qts. (1.9L)
Automatic Transaxle
3-Speed (Dexron-III)
Dry Refill5.8 Qts. (5.5L)
Drain & Refill2.6 Qts. (2.5L)
4-Speed (Dexron-III)
Dry Refill8.0 Qts. (7.6L)
Drain & Refill3.3 Qts. (3.1L)
Differential (2)
3-Speed A/T (Dexron-III)1.5 Qts. (1.4L)
(1) Approximate quantity listed. (2) On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity.
(1)Approximate quantity listed.
(2)On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity.

FLUID CAPACITIES

SERVICE INTERVALS & SPECIFICATIONS

ComponentMonthsMiles
Air Filter2430,000
Camshaft Timing Belt (1)
Normal Service(2)(2) *
Severe Service4860,000
Coolant2430,000
Engine Oil & Filter (1)
Normal Service67500
Severe Service45000
Spark Plugs2430,000
Automatic Transmission Fluid (1)
Normal Service(2)(2) *
Severe Service1215,000
Manual Transmission Fluid (1)
Normal Service(2)(2) *
Severe Service2430,000
(1) Different interval is required for normal service and severe service. Severe service is described as trailer towing, police, taxi, local delivery service, operating for short trips in freezing temperatures or operating in dusty conditions. (2) Service interval is not available from manufacturer at time of publication.
(1)Different interval is required for normal service and severe service. Severe service is described as trailer towing, police, taxi, local delivery service, operating for short trips in freezing temperatures or operating in dusty conditions.
(2)Service interval is not available from manufacturer at time of publication.

REPLACEMENT INTERVALS

ApplicationMonthsMiles
1.6L (1)4860,000
(1) Manufacturer recommends listening for valve noise from excessive valve clearance. Adjust valve clearance if valve noise exists.
(1)Manufacturer recommends listening for valve noise from excessive valve clearance. Adjust valve clearance if valve noise exists.

VALVE CLEARANCE ADJUSTMENT INTERVALS

ApplicationNew Belt(2) Used Belt
A/C160 (73)100 (45)
Generator175 (79)115 (52)
Power Steering150 (68)100 (45)
(1) Tension In Lbs. (kg) Using Burroughs Tension Gauge. (2) Used belt is a belt in operation at least 5 minutes.
(1)Tension In Lbs. (kg) Using Burroughs Tension Gauge.
(2)Used belt is a belt in operation at least 5 minutes.

BELT ADJUSTMENT (1)