Home/Toyota/Corolla/Toyota Corolla VIII (1995-2000)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul: Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul: Specifications Toyota Corolla VIII

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Air Intake Chamber Bolt/Nut (1)14 (19)
Distributor Hold-Down Bolt15 (20)
ECT Sensor(2)
Fuel Inlet Hose-To-Fuel Rail Union Bolt21 (29)
Fuel Outlet Line-To-Fuel Pump Mounting Bracket22 (30)
Fuel Rail-To-Intake Manifold Bolt11 (15)
Oxygen Sensor-To-Exhaust Pipe33 (45)
Throttle Body Bolt/Nut16 (22)
Vehicle Speed Sensor Retaining Bolt12 (16)
INCH Lbs. (N.m)
Crankshaft Position Sensor Bolt82 (9.3)
EGR Valve Retaining Nut115 (13.0)
Fuel Pressure Regulator Bolt82 (9.3)
Fuel Pump Mounting Bracket-To-Fuel Tank Bolt30 (3.4)
PNP Switch Retaining Bolt48 (5.4)
PNP Switch Retaining Nut61 (6.9)
(1) Tighten bolts/nuts to specification in sequence. (Схема №7) (2) Information is not available from manufacturer at time of publication.
(1)Tighten bolts/nuts to specification in sequence. (Схема №7)
(2)Information is not available from manufacturer at time of publication.

TORQUE SPECIFICATIONS

See also:
WIRING DIAGRAMS
ADJUSTMENTS