| Model | Specification |
|---|
| Coolant Replacement Interval |
| All Models | 60,00 Miles or 6 Months |
| Coolant Capacity |
| Camry |
| Man. Trans & 2WD A/T | 6.8 qts. (6.4L) |
| 4WD A/T | 7.2 qts. (6.8L) |
| Celica |
| 3S-FE | 6.7 qts. (6.3L) |
| 3S-GE | 6.6 qts. (6.2L) |
| 3S-GTE | 6.8 qts. (6.4L) |
| Corolla |
| 4A-FE | (2) 6.5 qts. (6.2L) |
| 4A-GE | 6.3 qts. (6.0L) |
| Pickup & 4Runner |
| 4WD A/T | 9.6 qts. (9.1L) |
| All Others | 8.9 qts. (8.4L) |
| Tercel |
| 3E | 5.5 qts. (5.2L) |
| 3E-E | 5.9 qts. (5.6L) |
| Pressure Cap Standard Opening Pressure | 10.7-14.9 psi |
| Thermostat Opens (1) |
| Camry, Celica, Corolla & Tercel | 176-183°F (80-84°C) |
| Pickup & 4Runner | 187-194°F (86-90°C) |
| (1) If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. (2) Some models have a coolant capacity of 5.9 qts. (5.6L). |
| (1) | If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
| (2) | Some models have a coolant capacity of 5.9 qts. (5.6L). |
4-CYLINDER ENGINE COOLING SYSTEM SPECIFICATIONS
| Model | Specification |
|---|
| Coolant Replacement Interval |
| All Models | 60,00 Miles or 6 Months |
| Coolant Capacity |
| Cressida | 8.8 qts. (8.3L) |
| Land Cruiser |
| Without Rear Heater | 18.5 qts. (17.5L) |
| With Rear Heater | 20.6 qts. (19.5L) |
| Supra | 8.6 qts. (8.1L) |
| Pressure Cap Standard Opening Pressure | 10.7-14.9 psi |
| Thermostat Opens (1) |
| Cressida, Land Cruiser & Supra | 187-194°F (86-90°C) |
| (1) If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
| (1) | If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
6-CYLINDER ENGINE COOLING SYSTEM SPECIFICATIONS
| Model | Specification |
|---|
| Coolant Replacement Interval |
| All Models | 60,00 Miles or 6 Months |
| Coolant Capacity |
| Camry | 10.0 qts. (9.5L) |
| Pickup & 4Runner |
| A/T | 10.9 qts. (10.3L) |
| M/T | 11.1 qts. (10.5L) |
| Pressure Cap Standard Opening Pressure | 10.7-14.9 psi |
| Thermostat Opens (1) |
| Pickup & 4Runner | 176-183°F (80-84°C) |
| (1) If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
| (1) | If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
V6 ENGINE COOLING SYSTEM SPECIFICATIONS
