PRECAUTION
- HANDLING AND OPERATIONAL PRECAUTIONS Explain to the customer that when the negative terminal is disconnected from the battery, the AM/FM channel presets in the radio receiver are cleared. If necessary, make a note of the recorded channel information before the negative terminal is disconnected, then reset the information after the negative terminal is reconnected. The removal/installation of the radio receiver should be performed after all cassette tapes, audio CDs, and map discs are ejected from the radio receiver. HINT: If a cassette tape, audio CD, or map disc cannot be ejected due to a malfunction in the radio receiver, do not attempt to remove it forcefully. Bring the vehicle to a repair center. Fasten the ground bolt securely when the antenna cord is removed or installed. HINT: Failure to fasten the ground bolt securely causes noise when receiving radio waves. Do not touch the cone paper of the speaker.
