Home/Toyota/Corolla/Toyota Corolla IX (2000-2004)/Repair manual/Cooling System (Mechanical)/Engine Cooling System: Removal & Installation

Contents

Wiring diagrams Section: Cooling System (Mechanical)

All sections

Engine Cooling System: Removal & Installation Toyota Corolla IX

Cooling System (Mechanical) 1 illustration

REMOVAL

Note. Removal of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the thermostat, even if the engine tends to overheat.

Scheme 12

Scheme 12: REMOVAL

Scheme 12: REMOVAL

Drain engine coolant.
Remove drive belt and generator. See «REMOVAL»(ref-173232-S39933043082005031100000) under GENERATOR.
Remove water inlet and thermostat. Disconnect the ECT switch connector. Remove the 2 nuts, and disconnect the water inlet from the cylinder block. Remove the thermostat. Remove the gasket from the thermostat