TROUBLESHOOTING
HINT
Troubleshoot the clock according to the table below.
| Troubleshooting | No. |
|---|---|
| Passenger seat belt warning light does not come on. | 1 |
| Clock does not operate. | 1 |
| Clock loses or gains time (+/- 1.5 seconds/day) | 2 |
TROUBLESHOOT CLOCK ACCORDING TO
Scheme 28
Scheme 29
Scheme 30
Scheme 31
- INSPECT CLOCK CIRCUIT
- TROUBLESHOOTING NO. 1 PASSENGER SEAT BELT WARNING LIGHT DOES NOT OPERATE CLOCK DOES NOT OPERATE Turn ignition switch ON. Check that the battery positive voltage is 10 - 16 V. If voltage is not as specified, replace the battery. Check that the DOME and ECU-ACC fuses are not blown. If the fuse is blown, replace the fuse and check for short. Troubleshoot the clock as follows. HINT: Inspect the connector on the wire harness side.
- TROUBLESHOOTING NO. 2 CLOCK LOSES OR GAINS TIME Turn ignition switch ON. Check that the battery positive voltage is 10 - 16 V. If voltage is not as specified, replace the battery. Inspect the error of the clock. Allowable error (per day): +/- 1.5 seconds If the error exceeds the allowable error, replace the clock. Check if the clock adjusting button is sticking in position and has failed to return. Troubleshoot the clock as follows. HINT: Inspect the connector on the wire harness side.