| CAUTION | If ECM replacement is instructed in following tests, always ensure ECM connectors and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. |
Note. For component location, see appropriate illustration in THEORY & OPERATION article.
Circuit Description
Knock sensor generates voltage when engine block vibrates due to knocking. DTC is set when there is no knock sensor signal to ECM with engine speed is 2000 RPM or more. Possible causes are
- Knock sensor circuit is open or shorted.
- Defective or loose knock sensor.
- Defective ECM.
Diagnostic Aids
Normal mode vibration frequency of knock sensor is 12.5 kHz (1ZZ-FE) or 7.1 kHz (2ZZ-GE). Using scan tool, read freeze frame data. Freeze frame records engine conditions when malfunction is detected.