Home/Toyota/Celica/Toyota Celica T200 рестайлинг (1995-1999)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul - 1.8L: Specifica…
Contents Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul - 1.8L: Specifications Toyota Celica T200 рестайлинг

TORQUE SPECIFICATIONS

ApplicationFt. Lbs. (N.m)
Air Intake Chamber Bolt/Nut (1)14 (19)
Distributor Hold-Down Bolt15 (20)
ECT Sensor(2)
Fuel Inlet Hose-To-Fuel Rail Union Bolt21 (29)
Fuel Outlet Line-To-Fuel Pump Mounting Bracket18 (24)
Fuel Rail-To-Intake Manifold Bolt11 (15)
Knock Sensor33 (45)
Oxygen Sensor-To-Exhaust Pipe33 (45)
Throttle Body Bolt/Nut16 (22)
Vehicle Speed Sensor Retaining Bolt12 (16)
Wheel Lug Nut76 (103)
INCH Lbs. (N.m)
Crankshaft Position Sensor Bolt82 (9.3)
EGR Valve Retaining Nut115 (13.0)
Fuel Pressure Regulator Bolt82 (9.3)
Fuel Pump Mounting Bracket-To-Fuel Tank Bolt31 (3.5)
PNP Switch Retaining Bolt48 (5.4)
PNP Switch Retaining Nut61 (6.9)
(1) Tighten bolts/nuts to specification in sequence. (Схема №8) (2) Information is not available from manufacturer at time of publication.
(1)Tighten bolts/nuts to specification in sequence. (Схема №8)
(2)Information is not available from manufacturer at time of publication.

TORQUE SPECIFICATIONS