COLD START INJECTOR TIME SWITCH
Turn ignition off. Remove connector from switch. (Scheme 101)-10 for Time Switch Location. Measure resistance across switch terminals at specified temperature. (Scheme 104) Replace switch if resistance is not within specification. See COLD START INJECTOR TIME SWITCH RESISTANCE SPECIFICATIONS table.
| Terminals & Temperature: °F (°C) | Ohms Reading | |
|---|---|---|
| STA-STJ | ||
| Less Than 50 (10) | 30-50 | |
| Greater Than 77 (25) | 70-90 | |
| STA-Ground | 30-90 | |
COLD START INJECTOR TIME SWITCH RESISTANCE SPECIFICATIONS
