COOLING SYSTEM SPECIFICATIONS
| Application | Specification |
|---|
| Coolant Replacement Interval |
| First Service | 45,000 Miles or 36 Months |
| Subsequent Servicing | 30,000 Miles or 24 Months |
| Coolant Capacity |
| Camry |
| 2WD | 6.8 Qts. (6.4L) |
| 4WD | 7.2 Qts. (6.8L) |
| Celica |
| 3S-GTE | 6.9 Qts. (6.5L) |
| 4A-FE |
| A/T | 5.9 Qts. (5.6L) |
| M/T | 5.5 Qts. (5.2L) |
| 5S-FE |
| A/T | 6.4 Qts. (6.1L) |
| M/T | 6.6 Qts. (6.2L) |
| Corolla |
| 4A-FE | 6.5 Qts. (6.2L) (2) |
| 4A-GE | 6.3 Qts. (6.0L) |
| MR2 |
| 3S-GTE | 14.4 Qts. (13.6L) |
| 5S-FE | 13.7 Qts. (13.0L) |
| Pickup & 4Runner |
| 4WD A/T | 9.6 Qts. (9.1L) |
| All Others | 8.9 Qts. (8.4L) |
| Previa | 12.3 Qts. (11.6L) |
| Tercel |
| A/T | 5.7 Qts. (5.4L) |
| M/T | 5.2 Qts. (4.9L) |
| Pressure Cap Standard Opening Pressure | 10.7-14.9 psi |
| Thermostat Opens (1) |
| Camry (4-Cyl.), Celica, Corolla, MR2, Previa & Tercel | 176-183°F (80-84°C) |
| Pickup & 4Runner (4-Cyl.) | 187-194°F (86-90°C) |
| (1) If thermostat is equipped with a "jiggle valve" on its flange, install "jiggle valve" properly. On Camry, Celica, MR2, Previa and Tercel, align "jiggle valve" with protrusion on thermostat housing. On Corolla, align "jiggle valve" with stud bolt or above water inlet housing. (2) Some models have a coolant capacity of 5.9 Qts. (5.6L). |
| (1) | If thermostat is equipped with a "jiggle valve" on its flange, install "jiggle valve" properly. On Camry, Celica, MR2, Previa and Tercel, align "jiggle valve" with protrusion on thermostat housing. On Corolla, align "jiggle valve" with stud bolt or above water inlet housing. |
| (2) | Some models have a coolant capacity of 5.9 Qts. (5.6L). |
ENGINE COOLING SYSTEM SPECS. (4-CYL)
| Application | Specification |
|---|
| Coolant Replacement Interval |
| First Service | 45,000 Miles or 36 Months |
| Subsequent Servicing | 30,000 Miles or 24 Months |
| Coolant Capacity |
| Camry V6 | 10.0 Qts. (9.5L) |
| Cressida | 8.8 Qts. (8.3L) |
| Land Cruiser |
| Without Rear Heater | 18.5 Qts. (17.5L) |
| With Rear Heater | 20.6 Qts. (19.5L) |
| Pickup & 4Runner V6 |
| A/T | 10.9 Qts. (10.3L) |
| M/T | 11.1 Qts. (10.5L) |
| Supra | 8.6 Qts. (8.1L) |
| Pressure Cap Standard Opening Pressure | 10.7-14.9 psi |
| Thermostat Opens (1) |
| Camry V6, Pickup & 4Runner | 176-183°F (80-84°C) |
| Cressida, Land Cruiser & Supra | 187-194°F (86-90°C) |
| (1) If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
| (1) | If thermostat is equipped with a "jiggle valve" on its flange, ensure "jiggle valve" is installed at 12 o'clock (straight-up) position. This applies to engines where thermostat flange is vertical when installed. |
ENGINE COOLING SYSTEM SPECS. (6-CYL & V6)
