A/T Models
- Disconnect electrical connector at Park/Neutral Position (PNP) switch. PNP switch is mounted on side of transmission/transaxle. Note terminal identification. (Scheme 547)- (Scheme 551).
- Using ohmmeter, check for continuity between specified terminals with shift lever in proper positions. See «PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS»(ref-151979-S25389995682003010900000) table. If proper continuity does not exist, adjust or replace PNP switch as necessary. For adjustment or replacement of PNP switch, see «PARK/NEUTRAL POSITION SWITCH»(ref-151984-S37516839162003010900000) under ENGINE SENSORS & SWITCHES in REMOVAL & INSTALLATION - V6 & V8 article.
| Application & Shift Lever Position | Continuity Between Terminals No. | |
|---|---|---|
| Avalon, Camry Solara & Sienna | ||
| Park | 2 & 7; 5 & 6 | |
| Reverse | 2 & 8 | |
| Neutral | 2 & 9; 5 & 6 | |
| Drive | 2 & 10 | |
| 2 | 2 & 3 | |
| Low | 2 & 4 | |
| Camry & Highlander | ||
| Park | 1 & 3; 6 & 9 | |
| Reverse | 2 & 3 | |
| Neutral | 3 & 5; 6 & 9 | |
| Drive | 3 & 7 | |
| 2 | 3 & 4 | |
| Low | 3 & 8 | |
| Land Cruiser & 4Runner 4.7L | ||
| Park | 1 & 3; 6 & 9 | |
| Reverse | 2 & 3 | |
| Neutral | 3 & 5; 6 & 9 | |
| Drive, 4 | 3 & 7 | |
| 3 | 3 & 4 | |
| 2, Low | 3 & 8 | |
| Sequoia | ||
| Park | 6 & 9 | |
| Reverse | 2 & 3 | |
| Neutral | 6 & 9 | |
| Drive | 3 & 7 | |
| 2 | 3 & 4 | |
| Low | 3 & 8 | |
| Tacoma & Tundra | ||
| Park | 6 & 9 | |
| Reverse | 3 & 6 | |
| Neutral | 6 & 9 | |
| Drive | 3 & 7 | |
| 2 | 3 & 4 | |
| Low | 3 & 8 | |
| 4Runner 4.0L | ||
| Park | 1 & 3; 6 & 9 | |
| Reverse | 2 & 3 | |
| Neutral | 3 & 5; 6 & 9 | |
| Drive, 3 | 3 & 7 | |
| 2 | 3 & 4 | |
| Low | 3 & 8 | |
PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS
