TORQUE SPECIFICATIONS
| Part tightened | N.m | Kgf.cm | Ft.lbf | ||
|---|---|---|---|---|---|
| TILT STEERING COLUMN | |||||
| Tilt lever lock shaft | 9.0 | 90 | 78 in..lbf | ||
| Turn signal bracket x Steering column upper tube | 7.5 | 75 | 65 in..lbf | ||
| Shift lever housing x Column tube assembly | 10 | 100 | 7 | ||
| Shift lever set bolt | 11 | 110 | 8 | ||
| Shift lock solenoid bracket x Shift lever housing | 3.4 | 35 | 30 in..lbf | ||
| Shift lock switch guide | 2.8 | 29 | 25 in..lbf | ||
| Universal joint assembly x Main shaft assembly | 35 | 360 | 26 | ||
| Steering column assembly set nut | 25 | 260 | 19 | ||
| Intermediate shaft sub-assembly x Control valve shaft | 35 | 360 | 26 | ||
| Universal joint assembly x Intermediate shaft sub-assembly | 35 | 360 | 26 | ||
| Steering wheel set nut | 50 | 510 | 37 | ||
| Steering wheel pad set screw (Torx screw) | 8.8 | 90 | 78 in..lbf | ||
| POWER STEERING VANE PUMP | |||||
| Rear housing set bolt | 17 | 170 | 12 | ||
| Pressure port union | 83 | 850 | 62 | ||
| Suction port union set bolt | 13 | 130 | 9 | ||
| Front bracket x Rear bracket | 43 | 440 | 32 | ||
| Vane pump pulley set nut | 44 | 450 | 33 | ||
| Pressure feed tube x PS vane pump assembly | 52 | 530 | 38 | ||
| Oil pressure switch | 21 | 210 | 15 | ||
| PS vane pump set bolt | A bolt | 29 (43) | 300 (440) | 22 (32) | |
| PS vane pump set bolt | B bolt | 43 | 440 | 32 | |
| Pressure feed tube x Pressure feed tube | 23 (25) | 230(250) | 17(18) | ||
| Clamp plate set nut | 7.8 | 80 | 69 in..lbf | ||
| POWER STEERING GEAR | |||||
| Control valve housing set bolt | 18 | 180 | 13 | ||
| Self-locking nut | 25 | 250 | 18 | ||
| Rack housing cap | 59 | 600 | 43 | ||
| Rack guide spring cap lock nut | 50 (69) | 510 (700) | 37 (51) | ||
| Rack x Rack end | 60 (83) | 610 (850) | 45 (61) | ||
| Tie rod end lock nut | 74 | 750 | 54 | ||
| Turn pressure tube union nut | 12(13) | 120(130) | 9(9) | ||
| PS gear assembly set bolt | 181 | 1,850 | 134 | ||
| Stabilizer bar set bolt | 19 | 190 | 14 | ||
| Pressure feed and return tubes x Control valve housing | 28 (25) | 290 (250) | 21 (18) | ||
| Pressure feed tube clamp plate set nut | 10 | 100 | 7 | ||
| Intermediate shaft sub-assembly x Control valve shaft | 35 | 360 | 26 | ||
| Tie rod end x Steering knuckle | 49 | 500 | 36 | ||
| ( ): For use without SST | |||||
Steering Torque Specifications