Home ReviewsRefund
Home/Toyota/Avalon/Toyota Avalon XX20 (1999-2002)/Repair manual/Engine Controls - System & Component Testing - V6 & V8/IG2 RELAY
Contents Wiring diagrams Section: Engine Controls - System & Component Testing - V6 & V8 All sections

IG2 RELAY Toyota Avalon XX20

Engine Controls - System & Component Testing - V6 & V8 ~110 words

IG2 RELAY

Note. IG2 relay may also be referred to as ignition relay.

  1. Ensure ignition is off. Remove IG2 relay from fuse/relay box at driver's side front corner of engine compartment, next to battery.
  2. To test IG2 relay continuity, using ohmmeter, check for continuity and no continuity between specified terminals on IG2 relay. see scheme 79
  3. To test IG2 relay operation, apply battery voltage and ground to IG2 relay relay and use ohmmeter to check continuity between specified terminals on IG2 relay relay. see scheme 79 Replace IG2 relay relay if defective.

See CIRCUIT OPENING RELAY under MOTORS & RELAYS.

See EFI MAIN RELAY under MOTORS & RELAYS.