CAPACITIES
| CAUTION | Some transaxles may require that differential be filled separately from transaxle. A separate quantity of lubricant is required for differential. See appropriate FLUID CAPACITIES table. |
AVALON FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) | 5.0 Qts. (4.7L) |
| Cooling System (Includes Heater) | 9.8 Qts. (9.3L) |
| Automatic Transaxle (Dexron-III) |
| Drain & Refill | 5.0 Qts. (4.7L) |
| Dry Fill | 8.5 Qts. (8.0L) |
| Differential (Dexron-III) | .90 Qt. (.85L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
CAMRY & CAMRY SOLARA FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) |
| 2.2L 4-Cyl. | 3.8 Qts. (3.6L) |
| 3.0L V6 | 5.0 Qts. (4.7L) |
| Cooling System (Includes Heater) |
| 2.2L 4-Cyl. | 7.3 Qts. (6.9L) |
| 3.0L V6 | 9.6 Qts. (9.1L) |
| Manual Transaxle (SAE 75W-90/API GL-5) |
| 2.2L 4-Cyl. | 2.3 Qts. (2.2L) |
| 3.0L V6 | 4.4 Qts. (4.2L) |
| Automatic Transaxle (Dexron-III) |
| 2.2L 4-Cyl. |
| Drain & Refill | 2.6 Qts. (2.5L) |
| Dry Fill | 5.9 Qts. (5.6L) |
| 3.0L V6 |
| Drain & Refill | 5.0 Qts. (4.7L) |
| Dry Fill | 8.5 Qts. (8.0L) |
| Differential (Dexron-III) (3) |
| 2.2L 4-Cyl. A/T | 1.7 Qts. (1.6L) |
| 3.0L V6 A/T | .90 Qt. (.85L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. (3) On M/T, differential fluid is included in transaxle capacity. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
| (3) | On M/T, differential fluid is included in transaxle capacity. |
CAMRY & CAMRY SOLARA FLUID CAPACITIES
CELICA FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) | 4.1 Qts. (3.9L) |
| Cooling System (Includes Heater) |
| A/T | 7.5 Qts. (7.1L) |
| M/T | 7.1 Qts. (6.7L) |
| Manual Transaxle (SAE 75W-90/API GL-5) | 2.3 Qts. (2.2L) |
| Automatic Transaxle (Dexron-III) |
| Drain & Refill | 2.6 Qts. (2.5L) |
| Dry Refill | 5.9 Qts. (5.6L) |
| Differential (Dexron-III) (3) |
| A/T | 1.7 Qts. (1.6L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. (3) On M/T, differential fluid is included in transaxle capacity. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
| (3) | On M/T, differential fluid is included in transaxle capacity. |
COROLLA FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) | 3.9 Qts. (3.7L) |
| Cooling System (Includes Heater) |
| A/T | 6.0 Qts. (5.7L) |
| M/T | 6.1 Qts. (5.8L) |
| Manual Transaxle (SAE 75W-90/API GL-5) | 2.0 Qts. (1.9L) |
| Automatic Transaxle |
| 3-Speed (Dexron-III) |
| Drain & Refill | 2.6 Qts. (2.5L) |
| Dry Refill | 5.8 Qts. (5.5L) |
| 4-Speed (Dexron-III) |
| Drain & Refill | 3.3 Qts. (3.1L) |
| Dry Refill | 8.0 Qts. (7.6L) |
| Differential (3) |
| 3-Speed A/T (Dexron-III) | 1.5 Qts. (1.4L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. (3) On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
| (3) | On 4-speed A/T and all M/T, differential fluid is included in transaxle capacity. |
LAND CRUISER FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) | 7.2 Qts. (6.8L) |
| Cooling System (Includes Heater) |
| With Front Heater Only | 15.6 Qts. (14.8L) |
| With Front & Rear Heater | 16.2 Qts. (15.3L) |
| Automatic Transmission (Dexron-III) |
| Drain & Refill | 2.0 Qts. (1.9L) |
| Dry Refill | 12.4 Qts. (11.7L) |
| Differential |
| Front Axle (SAE 80W-90/API GL-5) | 1.8 Qts. (1.7L) |
| Rear Axle |
| With Limited Slip Differential (LSD) (Hypoid Gear Oil LSD SAE 80W-90/API GL-5) | 3.5 Qts. (3.3L) |
| With Rear Differential Lock (SAE 80W-90/API GL-5) | 3.4 Qts. (3.2L) |
| Without Rear Differential Lock (SAE 80W-90/API GL-5) | 3.5 Qts. (3.3L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.4 Qts. (1.3L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
LAND CRUISER FLUID CAPACITIES
RAV4 FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) | 4.3 Qts. (4.1L) |
| Cooling System (Includes Heater) |
| A/T | 8.1 Qts. (7.7L) |
| M/T | 8.5 Qts. (8.0L) |
| Manual Transaxle (SAE 75W-90/API GL-5) |
| 2WD | 4.1 Qts. (3.9L) |
| 4WD | 5.3 Qts. (5.0L) |
| Automatic Transaxle |
| 2WD (Dexron-III) |
| Drain & Refill | 3.3 Qts. (3.1L) |
| Dry Refill | 8.5 Qts. (8.0L) |
| 4WD (Toyota Type "T" Or "T-IV" ATF) |
| Drain & Refill | 3.5 Qts. (3.3L) |
| Dry Refill | 7.4 Qts. (7.0L) |
| Differential (SAE 80W-90/API GL-5) |
| 4WD |
| Rear Axle | 1.0 Qt. (.9L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) |
| 4WD With A/T | .74 Qt. (.70L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
SIENNA FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) | 5.0 Qts. (4.7L) |
| Cooling System (Includes Heater) |
| With Rear Heater | 11.0 Qts. (10.4L) |
| Without Rear Heater | 10.0 Qts. (9.5L) |
| Automatic Transaxle (Dexron-III) |
| Drain & Refill | 3.7 Qts. (3.5L) |
| Dry Fill | 8.0 Qts. (7.6L) |
| Differential (Dexron-III) | .85 Qt. (.80L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
TACOMA FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) |
| 2WD |
| PreRunner |
| 2.7L 4-Cyl. (3RZ-FE) | 5.7 Qts. (5.4L) |
| 3.4L V6 | 5.5 Qts. (5.2L) |
| Except PreRunner |
| 2.4L 4-Cyl. (2RZ-FE) | 5.8 Qts. (5.5L) |
| 3.4L V6 | 5.7 Qts. (5.4L) |
| 4WD |
| 2.7L 4-Cyl. (3RZ-FE) | 5.7 Qts. (5.4L) |
| 3.4L V6 | 5.5 Qts. (5.2L) |
| Cooling System (Includes Heater) |
| 2WD |
| PreRunner |
| A/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.7 Qts. (8.2L) |
| 3.4L V6 | 10.5 Qts. (10.0L) |
| M/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.8 Qts. (8.3L) |
| 3.4L V6 | 10.7 Qts. (10.1L) |
| Except PreRunner |
| A/T |
| 2.4L 4-Cyl. (2RZ-FE) | 8.2 Qts. (7.8L) |
| 3.4L V6 | 10.0 Qts. (9.5L) |
| M/T |
| 2.4L 4-Cyl. (2RZ-FE) | 8.5 Qts. (8.0L) |
| 3.4L V6 | 10.3 Qts. (9.7L) |
| 4WD |
| A/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.7 Qts. (8.2L) |
| 3.4L V6 | 10.5 Qts. (10.0L) |
| M/T |
| 2.7L 4-Cyl. (3RZ-FE) | 8.8 Qts. (8.3L) |
| 3.4L V6 | 10.7 Qts. (10.1L) |
| Manual Transmission (SAE 75W-90/API GL-5) |
| 2WD | 2.7 Qts. (2.6L) |
| 4WD |
| 2.7L 4-Cyl. (3RZ-FE) | 2.6 Qts. (2.5L) |
| 3.4L V6 | 2.3 Qts. (2.2L) |
| Automatic Transmission (Dexron-III) |
| 2WD |
| PreRunner |
| 2.7L 4-Cyl. (3RZ-FE) & 3.4L V6 |
| Drain & Refill | 1.7 Qts. (1.6L) |
| Dry Refill | 7.6 Qts. (7.2L) |
| Except PreRunner |
| 2.4L 4-Cyl. (2RZ-FE) |
| Drain & Refill | 2.5 Qts. (2.4L) |
| Dry Refill | 6.9 Qts. (6.5L) |
| 3.4L V6 |
| Drain & Refill | 1.7 Qts. (1.6L) |
| Dry Refill | 7.6 Qts. (7.2L) |
| 4WD |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 10.7 Qts. (10.1L) |
| Differential |
| 2WD (SAE 80W-90/API GL-5) |
| PreRunner |
| 2.7L 4-Cyl. (3RZ-FE) | 2.7 Qts. (2.6L) |
| 3.4L V6 |
| Xtracab With Rear Differential Lock System | 3.1 Qts. (2.9L) |
| All Others | 2.7 Qts. (2.6L) |
| Except PreRunner |
| 2.4L 4-Cyl. (2RZ-FE) | 1.4 Qts. (1.3L) |
| 3.4L V6 | 2.7 Qts. (2.6L) |
| 4WD |
| Front Axle |
| With Automatic Disconnecting Differential (SAE 75W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Without Automatic Disconnecting Differential (SAE 80W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Rear Axle (SAE 80W-90/APGL-5) |
| Short Wheel Base |
| With Rear Differential Lock System | 2.8 Qts. (2.7L) |
| Without Rear Differential Lock System | 2.7 Qts. (2.6L) |
| Long Wheel Base |
| With Rear Differential Lock System | 3.1 Qts. (2.9L) |
| Without Rear Differential Lock System | 2.6 Qts. (2.5L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
TUNDRA FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) |
| 3.4L V6 | 5.5 Qts. (5.2L) |
| 4.7L V8 | 6.4 Qts. (6.1L) |
| Cooling System (Includes Heater) |
| A/T |
| 3.4L V6 | 10.5 Qts. (9.9L) |
| 4.7L V8 | 12.3 Qts. (11.6L) |
| M/T | 10.6 Qts. (10.0L) |
| Manual Transmission (SAE 75W-90/API GL-5) |
| 2WD | 2.7 Qts. (2.6L) |
| 4WD | 2.3 Qts. (2.2L) |
| Automatic Transmission (Dexron-III) |
| 3.4L V6 |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 10.7 Qts. (10.1L) |
| 4.7L V8 |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 13.0 Qts. (12.3L) |
| Differential |
| 2WD (SAE 80W-90/API GL-5) | 4.0 Qts. (3.8L) |
| 4WD |
| Front Axle (SAE 75W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Rear Axle (SAE 80W-90/APGL-5) | 3.7 Qts. (3.5L) |
| Power Steering Fluid (Dexron-III) | 1.1 Qt. (1.0L) |
| Transfer Case (SAE 75W-90/API GL-5) | 1.1 Qts. (1.0L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
4RUNNER FLUID CAPACITIES
| Application | (1) Quantity |
| Crankcase (Includes Filter) (2) |
| 2.7L 4-Cyl. | 5.7 Qts. (5.4L) |
| 3.4L V6 | 5.5 Qts. (5.2L) |
| Cooling System (Includes Heater) |
| 2.7L 4-Cyl. |
| With Rear Heater | 11.6 Qts. (11.0L) |
| Without Rear Heater | 10.6 Qts. (10.0L) |
| 3.4L V6 |
| With Rear Heater | 9.5 Qts. (9.0L) |
| Without Rear Heater | 8.5 Qts. (8.0L) |
| Manual Transmission (SAE 75W-90/API GL-5) |
| 2.7L 4-Cyl. |
| 2WD | 2.7 Qts. (2.6L) |
| 4WD | 2.6 Qts. (2.5L) |
| 3.4L V6 | 2.3 Qts. (2.2L) |
| Automatic Transmission (Dexron-III) |
| 2WD |
| Drain & Refill | 1.7 Qts. (1.6L) |
| Dry Refill | 7.6 Qts. (7.2L) |
| 4WD |
| Drain & Refill | 2.1 Qts. (2.0L) |
| Dry Refill | 10.8 Qts. (10.2L) |
| Differential |
| 2WD (SAE 80W-90/API GL-5) | 2.9 Qts. (2.8L) |
| 4WD |
| Front Axle |
| With Automatic Disconnecting Differential (SAE 75W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Without Automatic Disconnecting Differential (SAE 80W-90/API GL-5) | 1.2 Qts. (1.1L) |
| Rear Axle (SAE 80W-90/API GL-5) |
| With Rear Differential Lock System | 2.9 Qts. (2.8L) |
| Without Rear Differential Lock System | 2.6 Qts. (2.5L) |
| Power Steering Fluid (Dexron-III) | .85 Qt. (.80L) |
| Transfer Case (SAE 75W-90/API GL-5) |
| Models With 4WD Button On Side Of Transfer Case Shift Lever | 1.3 Qt. (1.2L) |
| Models Without 4WD Button On Side Of Transfer Case Shift Lever | 1.1 Qt. (.1.0L) |
| (1) Approximate quantity is listed. (2) Use an API SJ energy conserving engine oil. |
| (1) | Approximate quantity is listed. |
| (2) | Use an API SJ energy conserving engine oil. |
4-CYLINDER COMPRESSION SPECIFICATIONS
| Application | Specification |
| Compression Ratio |
| Camry, Camry Solara & Celica | 9.5:1 |
| Corolla | 10.0:1 |
| RAV4, Tacoma & 4Runner | 9.5:1 |
| Normal Compression Pressure |
| Camry, Camry Solara & Celica | 178 psi (12.5 kg/cm 2 ) |
| Corolla | 218 psi (15.3 kg/cm 2 ) |
| RAV4, Tacoma & 4Runner | 178 psi (12.5 kg/cm 2 ) |
| Minimum Compression Pressure |
| Camry, Camry Solara & Celica | 142 psi (10.0 kg/cm 2 ) |
| Corolla | 145 psi (10.2 kg/cm 2 ) |
| RAV4, Tacoma & 4Runner | 128 psi (9.0 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| All Models | 14 psi (1.0 kg/cm 2 ) |
4-CYLINDER COMPRESSION SPECIFICATIONS
V6 COMPRESSION SPECIFICATIONS
| Application | Specification |
| Compression Ratio |
| Avalon, Camry, Camry Solara & Sienna | 10.5:1 |
| Tacoma, Tundra & 4Runner | 9.6:1 |
| Normal Compression Pressure |
| Avalon, Camry, Camry Solara & Sienna | 218 psi (15.3 kg/cm 2 ) |
| Tacoma, Tundra & 4Runner | 174 psi (12.2 kg/cm 2 ) |
| Minimum Compression Pressure |
| All Models | 145 psi (10.1 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| All Models | 15 psi (1.1 kg/cm 2 ) |
V6 COMPRESSION SPECIFICATIONS
V8 COMPRESSION SPECIFICATIONS
| Application | Specification |
| Compression Ratio |
| Land Cruiser & Tundra | 9.6:1 |
| Normal Compression Pressure |
| Land Cruiser & Tundra | 192 psi (13.5 kg/cm 2 ) |
| Minimum Compression Pressure |
| Land Cruiser & Tundra | 142 psi (10.0 kg/cm 2 ) |
| Maximum Variation Between Cylinders |
| Land Cruiser & Tundra | 14 psi (1.0 kg/cm 2 ) |
V8 COMPRESSION SPECIFICATIONS
4-CYLINDER VALVE CLEARANCE SPECIFICATIONS
| Application | In. (mm) |
| Camry, Camry Solara & Celica |
| Intake | .007-.011 (.19-.29) |
| Exhaust | .011-.015 (.29-.38) |
| Corolla |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| RAV4 |
| Intake | .007-.011 (.19-.29) |
| Exhaust | .011-.015 (.29-.38) |
| Tacoma & 4Runner |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| (1) Adjust valve clearance with engine cold. |
| (1) | Adjust valve clearance with engine cold. |
4-CYLINDER VALVE CLEARANCE SPECIFICATIONS (1)
V6 VALVE CLEARANCE SPECIFICATIONS
| Application | In. (mm) |
| Avalon, Camry, Camry Solara & Sienna |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| Tacoma, Tundra & 4Runner |
| Intake | .006-.009 (.15-.23) |
| Exhaust | .011-.014 (.29-.35) |
| (1) Adjust valve clearance with engine cold. |
| (1) | Adjust valve clearance with engine cold. |
V6 VALVE CLEARANCE SPECIFICATIONS (1)
V8 VALVE CLEARANCE SPECIFICATIONS
| Application | In. (mm) |
| Land Cruiser & Tundra |
| Intake | .006-.010 (.15-.25) |
| Exhaust | .010-.014 (.25-.35) |
| (1) Adjust valve clearance with engine cold. |
| (1) | Adjust valve clearance with engine cold. |
V8 VALVE CLEARANCE SPECIFICATIONS (1)
4-CYLINDER SPARK PLUG SPECIFICATIONS
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
| Camry, Camry Solara, Celica, Corolla & RAV4 | .043 (1.10) | 13 (18) |
| Tacoma & 4Runner | .031 (.80) | 15 (20) |
4-CYLINDER SPARK PLUG SPECIFICATIONS
V6 SPARK PLUG SPECIFICATIONS
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
| Avalon, Camry, Camry Solara, Sienna, Tacoma, Tundra & 4Runner | .043 (1.10) | 13 (18) |
V6 SPARK PLUG SPECIFICATIONS
V8 SPARK PLUG SPECIFICATIONS
| Application | Gap In. (mm) | Torque Ft. Lbs. (N.m) |
| Land Cruiser | .043 (1.10) | 13 (18) |
| Tundra | .031 (.80) | 13 (18) |
V8 SPARK PLUG SPECIFICATIONS
4-CYLINDER IDLE SPEED SPECIFICATIONS
| Application | RPM |
| Camry, Camry Solara, Celica & Corolla | 650-750 |
| RAV4 | 700-800 |
| Tacoma & 4Runner | 650-750 |
| (1) Check with engine at normal operating temperature, transmission/transaxle in Neutral, parking brake applied, air cleaner and all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, electric cooling fan off (if equipped), and A/C and all accessories off. |
| (1) | Check with engine at normal operating temperature, transmission/transaxle in Neutral, parking brake applied, air cleaner and all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, electric cooling fan off (if equipped), and A/C and all accessories off. |
4-CYLINDER IDLE SPEED SPECIFICATIONS (1)
V6 IDLE SPEED SPECIFICATIONS
| Application | RPM |
| Avalon, Camry, Camry Solara, Sienna, Tacoma, Tundra & 4Runner | 650-750 |
| (1) Check with engine at normal operating temperature, transmission/transaxle in Neutral, parking brake applied, air cleaner and all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
| (1) | Check with engine at normal operating temperature, transmission/transaxle in Neutral, parking brake applied, air cleaner and all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
V6 IDLE SPEED SPECIFICATIONS (1)
V8 IDLE SPEED SPECIFICATIONS
| Application | RPM |
| Land Cruiser & Tundra | 650-750 |
| (1) Check with engine at normal operating temperature, transmission in Neutral, parking brake applied, air cleaner and all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
| (1) | Check with engine at normal operating temperature, transmission in Neutral, parking brake applied, air cleaner and all vacuum hoses installed, electronic fuel injection system wiring connectors properly installed, ignition timing properly set, and A/C and all accessories off. |
V8 IDLE SPEED SPECIFICATIONS (1)
DASHPOT SPECIFICATIONS
| Application | RPM |
| Tacoma 3.4L V6 M/T & 4Runner 3.4L V6 M/T | 1800-2200 |
| (1) Check with engine at normal operating temperature. |
| (1) | Check with engine at normal operating temperature. |
DASHPOT SPECIFICATIONS (1)
AVALON TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 3.0L | Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
AVALON TP SENSOR RESISTANCE SPECIFICATIONS (1)
CAMRY & CAMRY SOLARA TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 2.2L 4-Cyl. | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 3.0L V6 | Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
CAMRY & CAMRY SOLARA TP SENSOR RESISTANCE SPECIFICATIONS (1)
CELICA TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 2.2L | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
CELICA TP SENSOR RESISTANCE SPECIFICATIONS (1)
COROLLA TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 1.8L | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
COROLLA TP SENSOR RESISTANCE SPECIFICATIONS
LAND CRUISER TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Terminals | Ohms |
| 4.7L | VC & E2 | (1) 1250-2350 |
| (1) Resistance at 68°F (20°C). |
| (1) | Resistance at 68°F (20°C). |
LAND CRUISER TP SENSOR RESISTANCE SPECIFICATIONS
RAV4 TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 2.0L | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
RAV4 TP SENSOR RESISTANCE SPECIFICATIONS (1)
SIENNA TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 3.0L | Fully Closed | VTA & E2 | 200-6300 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
SIENNA TP SENSOR RESISTANCE SPECIFICATIONS (1)
TACOMA TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 2.4L 4-Cyl. & 2.7L 4-Cyl. | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 3.4L V6 | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
TACOMA TP SENSOR RESISTANCE SPECIFICATIONS (1)
TUNDRA TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 3.4L V6 (1) | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 4.7L V8L | — | VC & E2 | (2) 1250-2350 |
| (1) Apply vacuum to throttle opener before checking TP sensor. (2) Resistance at 68°F (20°C). |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
| (2) | Resistance at 68°F (20°C). |
TUNDRA TP SENSOR RESISTANCE SPECIFICATIONS
4RUNNER TP SENSOR RESISTANCE SPECIFICATIONS
| Application | Throttle Position | Terminals | Ohms |
| 2.7L 4-Cyl. | Fully Closed | VTA & E2 | 200-5700 |
| Fully Open | VTA & E2 | 2000-10,200 |
| VC & E2 | 2500-5900 |
| 3.4L V6 | Fully Closed | VTA & E2 | 280-6400 |
| Fully Open | VTA & E2 | 2000-11,600 |
| VC & E2 | 2700-7700 |
| (1) Apply vacuum to throttle opener before checking TP sensor. |
| (1) | Apply vacuum to throttle opener before checking TP sensor. |
4RUNNER TP SENSOR RESISTANCE SPECIFICATIONS (1)