BELT ADJUSTMENT
Ensure all drive belts are adjusted to proper tension. See appropriate BELT ADJUSTMENT table. On models with an automatic belt tensioner, no adjustment is necessary, but serpentine drive belt must be properly installed.
| Application | New Belt | (2) Used Belt |
|---|
| Camry & Camry Solara |
| A/C | 165 (75) | 110 (50) |
| Generator |
| With A/C | 165 (75) | 100 (45) |
| Without A/C | 125 (57) | 95 (43) |
| Power Steering | 145 (66) | 100 (45) |
| Celica |
| 1999 |
| Generator |
| With A/C | 175 (79) | 115 (52) |
| Without A/C | 125 (57) | 95 (43) |
| Power Steering | 99-121 (45-55) | 44-77 (20-35) |
| 2000 (3) |
| ECHO |
| A/C & Generator | 121-143 (55-65) | 55-88 (25-40) |
| Power Steering | 100-121 (45-55) | 55-77 (25-35) |
| MR2 (3) |
| RAV4 |
| A/C | 160 (73) | 100 (45) |
| Generator |
| With A/C | 165 (75) | 110 (50) |
| Without A/C | 125 (57) | 95 (43) |
| Power Steering | 145 (66) | 100 (45) |
| Tacoma |
| A/C | 160 (73) | 100 (45) |
| Generator | 150 (71) | 75 (32) |
| Power Steering | 180 (82) | 120 (54) |
| 4Runner |
| A/C & Generator | 160 (73) | 100 (45) |
| Power Steering | 180 (82) | 120 (54) |
| (1) Tension in Lbs. (kg) using Burroughs tension gauge. (2) Used belt is a belt in operation for at least 5 minutes. (3) Automatic belt tensioner is used. |
| (1) | Tension in Lbs. (kg) using Burroughs tension gauge. |
| (2) | Used belt is a belt in operation for at least 5 minutes. |
| (3) | Automatic belt tensioner is used. |
4-CYLINDER BELT ADJUSTMENT (1)
| Application | New Belt | (2) Used Belt |
|---|
| Avalon, Camry, Camry Solara & Sienna |
| A/C | 165 (75) | 110 (50) |
| Generator | 175 (79) | 115 (52) |
| Power Steering | 165 (75) | 115 (52) |
| 4Runner |
| A/C | 160 (73) | 100 (45) |
| Generator | 170 (77) | 88 (40) |
| Power Steering | 180 (82) | 120 (54) |
| Tacoma & Tundra |
| A/C | 160 (73) | 100 (45) |
| Generator | 160 (73) | 100 (45) |
| Power Steering | 160 (73) | 100 (45) |
| (1) Tension in Lbs. (kg) using Burroughs tension gauge. (2) Used belt is a belt in operation for at least 5 minutes. |
| (1) | Tension in Lbs. (kg) using Burroughs tension gauge. |
| (2) | Used belt is a belt in operation for at least 5 minutes. |
| Application | Specification |
|---|
| Coolant Replacement Interval First Service Interval (1) | 45,000 Miles Or 36 Months |
| Coolant Capacity |
| Camry & Camry Solara |
| W/ Oil Cooler | 7.3 Qts. (6.9L) |
| W/O Oil Cooler | 6.5 Qts. (6.2L) |
| Celica |
| 1ZZ-FE |
| A/T | 5.9 Qts. (5.6L) |
| M/T | 6.0 Qts. (5.7L) |
| 2ZZ-GE |
| A/T | 6.1 Qts. (5.8L) |
| M/T | 6.2 Qts. (5.9L) |
| Corolla |
| A/T | 6.0 Qts. (5.7L) |
| M/T | 6.1 Qts. (5.8L) |
| ECHO |
| A/T | 4.5 Qts. (4.3L) |
| M/T | 4.7 Qts. (4.4L) |
| MR2 | 10.9 Qts. (10.4L) |
| RAV4 |
| A/T | 8.1 Qts. (7.7L) |
| M/T | 8.5 Qts. (8.0L) |
| Tacoma |
| 2WD |
| A/T | 8.2 Qts. (7.8L) |
| M/T | 8.5 Qts. (8.0L) |
| 4WD |
| A/T | 8.7 Qts. (8.2L) |
| M/T | 8.8 Qts. (8.3L) |
| 4Runner |
| Without Rear Heater | 10.6 Qts. (10.0L) |
| With Rear Heater | 11.6 Qts. (11.0L) |
| Pressure Cap Standard Opening Pressure |
| Except Celica (2000), Echo, MR2 & RAV4 | (2) 10.7-14.9 psi |
| Celica (2000), Echo, MR2 & RAV4 | (3) 13.5-17.8 psi |
| Thermostat Opening Temperature |
| Except Corolla | 176-183°F (80-84°C) |
| Corolla | 165-173°F (74-78°C) |
| (1) After first service interval, replace coolant every 30,000 miles or 24 months. (2) Minimum opening pressure is 8.5 psi. (3) Minimum opening pressure is 11.4 psi. |
| (1) | After first service interval, replace coolant every 30,000 miles or 24 months. |
| (2) | Minimum opening pressure is 8.5 psi. |
| (3) | Minimum opening pressure is 11.4 psi. |
4-CYLINDER COOLING SYSTEM SPECIFICATIONS
| Application | Specification |
|---|
| Coolant Replacement Interval First Service Interval (1) | 45,000 Miles Or 36 Months |
| Coolant Capacity |
| Avalon |
| 1999 | 9.4 Qts. (8.9L) |
| 2000 | 9.5 Qts. (9.0L) |
| Camry & Camry Solara | 9.7 Qts. (9.2L) |
| With Oil Cooler | 7.3 Qts. (6.9L) |
| Without Oil Cooler | 6.5 Qts. (6.2L) |
| Sienna |
| Without Rear Heater | 10.0 Qts. (9.5L) |
| With Rear Heater | 11.0 Qts. (10.4L) |
| Tacoma |
| A/T | 10.5 Qts. (9.9L) |
| M/T | 10.7 Qts. (10.1L) |
| Tundra |
| A/T | 10.5 Qts. (9.9L) |
| M/T | 10.6 Qts. (10.0L) |
| 4Runner |
| Without Rear Heater | 8.5 Qts. (8.0L) |
| With Rear Heater | 9.5 Qts. (9.0L) |
| Pressure Cap Standard Opening Pressure |
| Except Avalon, Camry, Camry Solara & Sienna | (2) 10.7-14.9 psi |
| Avalon, Camry, Camry Solara & Sienna | (3) 12.1-16.4 psi |
| Thermostat Opening Temperature | 176-183°F (80-84°C) |
| (1) After first service interval, replace coolant every 30,000 miles or 24 months. (2) Minimum opening pressure is 8.5 psi. (3) Minimum opening pressure is 10.0 psi. |
| (1) | After first service interval, replace coolant every 30,000 miles or 24 months. |
| (2) | Minimum opening pressure is 8.5 psi. |
| (3) | Minimum opening pressure is 10.0 psi. |
V6 COOLING SYSTEM SPECIFICATIONS
| Application | Specification |
|---|
| Coolant Replacement Interval First Service Interval (1) | 45,000 Miles Or 36 Months |
| Coolant Capacity |
| Land Cruiser |
| Without Rear Heater | 16.2 Qts. (15.3L) |
| With Rear Heater | 15.6 Qts. (14.8L) |
| Tundra | 12.3 Qts. (11.6L) |
| Pressure Cap Standard Opening Pressure |
| Land Cruiser |
| Standard Opening Pressure | 13.5-17.8 psi |
| Minimum Opening Pressure | 11.4 psi |
| Tundra |
| Standard Opening Pressure | 10.7-14.9 psi |
| Minimum Opening Pressure | 8.6 psi |
| Thermostat Opening Temperature | 176-183°F (80-84°C) |
| (1) After first service interval, replace coolant every 30,000 miles or 24 months. |
| (1) | After first service interval, replace coolant every 30,000 miles or 24 months. |
V8 COOLING SYSTEM SPECIFICATIONS
