Tightening Torque Specifications
| CAUTION | For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions". |
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N.m | Kgf-m | Lbf-ft | ||
| Oil pressure switch | 13 | 1.3 | 9.5 | |
| Engine oil drain plug | 35 | 3.6 | 26.0 | |
| Oil filter | 14 | 1.4 | 10.5 | |
| Oil strainer bolt | 11 | 1.1 | 8.5 | |
| Oil pan bolt* | 15 N.m --> 25 N.m (1.5 kgf-m --> 2.5 kgf-m, 11.0 lbf-ft --> 18.5 lbf-ft) | |||
| Transaxle bolt | 85 | 8.7 | 63.0 | |
| Drive plate cover bolt | 11 | 1.1 | 8.5 | (CVT model) |
| Clutch housing lower plate bolt | 11 | 1.1 | 8.5 | (M/T model) |
| Oil level gauge guide bolt | 11 | 1.1 | 8.5 | |
| Engine front mounting bolt | 55 | 5.6 | 40.5 | |
| Engine front mounting member No. 1 bolt | 55 | 5.6 | 40.5 | |
| Engine front mounting member No. 2 bolt | 59 | 6.0 | 43.5 | |
| Oil pump mounting bolt | 25 | 2.5 | 18.5 | |
| Baffle plate bolt (M6 bolt) | 11 | 1.1 | 8.5 | |
| Baffle plate bolt (M10 bolt) | 55 | 5.6 | 40.5 | |
| Oil pump sprocket cover bolt | 11 | 1.1 | 8.5 | |
| Oil pump relief valve retainer | 28 | 2.9 | 21.0 | |
| Oil pump case bolt | 12 | 1.2 | 9.0 | |
TIGHTENING TORQUE SPECIFICATIONS
Note. The specified tightening torque is described in the following. OIL PAN AND OIL PUMP STRAINER COMPONENTS OIL PUMP ASSEMBLY COMPONENTS
Reference
For the tightening torque of fastener not specified in this section, refer to FASTENERS INFORMATION.
See also:
• DTC CHECK
• FRONT BUMPER AND REAR BUMPER COMPONENTS