RIDING HEIGHT ADJUSTMENT
Note. Prior to performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY & OPERATION article in GENERAL INFORMATION.
Before adjusting alignment, check riding height. Check riding height with vehicle on level floor and tires properly inflated. Bounce vehicle several times and allow suspension to settle.
Visually inspect vehicle for signs of abnormal height from front to rear or side to side. Check passenger and luggage compartments for extra heavy items and remove if present. On all models, riding height between right and left sides should vary less than .60" (15 mm).
CAMBER & CASTER ADJUSTMENT
Camber is pre-adjusted at factory and cannot be adjusted. If camber is out of specification, check for damaged, loose, bent or worn suspension parts. Check body for damage. Repair as needed to attain specification.