Note. Prior to performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY & OPERATION article in WHEEL ALIGNMENT section.
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 1 | 0.25 To 1.75 |
| Caster (1) | 3.5 | 2.5 To 4.5 |
| Toe-In (2) |
| Front | .18 (4.5) | 0.1 To 0.28 (2.5 To 7) |
| Toe-In (1) |
| Front | .36 | 0.2 To 0.56 |
| Toe-Out On Turns (1) |
| Inner | 29 | N/A |
| Outer | 26 | N/A |
| (1) Measurement is in degrees. (2) Measurement is in inches (mm). |
| (1) | Measurement is in degrees. |
| (2) | Measurement is in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS (SAMURAI)
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 0.5 | 0.5 To 1.5 |
| Caster (1) | 1.5 | 0.5 To 2.5 |
| Toe-In (2) |
| Front | .16 (4) | 0.08 To 0.24 (2 To 6) |
| Toe-In (1) |
| Front | .32 | 0.16 To 0.48 |
| Toe-Out On Turns (1) |
| Inner | 32.5 | N/A |
| Outer | 30.5 | N/A |
| (1) Measurement is in degrees. (2) Measurement is in inches (mm). |
| (1) | Measurement is in degrees. |
| (2) | Measurement is in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS (SIDEKICK)
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 0 | 1 To 1 |
| Rear | 0 | 0.5 To 0.5 |
| Caster (1) | 3 | 1 To 5 |
| Toe-In (2) |
| Front | 0 (0) | 0.08 To 0.08 (-2 To 2) |
| Rear | 0.08 (2) | 0 To 0.16 (0 To 4) |
| Toe-In (1) |
| Front | 0 | 0.16 To 0.16 |
| Rear | 0.16 | 0 To 0.32 |
| Toe-Out On Turns (1) |
| Inner | 38 | N/A |
| Outer | 32 | N/A |
| (1) Measurement is in degrees. (2) Measurement is in inches (mm). |
| (1) | Measurement is in degrees. |
| (2) | Measurement is in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS (SWIFT)
