Note. Prior to performing wheel alignment, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY/OPERATION article in the GENERAL INFORMATION section.
| Application | Preferred | Range |
|---|
| Camber (1) |
| Front | 1 | 0.25 To 1.75 |
| Caster (1) | 3.5 | 2.5 To 4.5 |
| Toe-In (2) |
| Front | .18 (4.5) | 0.1 To 0.28 (2.5 To 7) |
| Toe-In (1) |
| Front | .36 | 0.2 To 0.56 |
| Toe-Out On Turns (1) |
| Inner | 29 | N/A |
| Outer | 26 | N/A |
| (1) Measurement is in degrees. (2) Measurement is in inches (mm). |
| (1) | Measurement is in degrees. |
| (2) | Measurement is in inches (mm). |
WHEEL ALIGNMENT SPECIFICATIONS
