Removal Suzuki Kizashi I

Removal

Remove OCV (2) and O-ring (3) from timing chain cover (1).

Scheme 69

Reverse removal procedure noting the following point

1. Tighten OCV bolt to specified torque. Tightening torque OCV bolt: 11 N.m (1.1 kg-m, 8.5 lbf-ft)

Scheme 70

1. Remove transmission assembly. M/T model: «MANUAL TRANSAXLE UNIT DISMOUNTING AND REMOUNTING»(ref-585624-S15424779752013111200000) . CVT model: «CVT ASSEMBLY DISMOUNTING AND REMOUNTING»(ref-585587-S29986396022013111200000) .
2. Wedge a special tool in ring gear teeth to lock flywheel or drive plate as shown in figure. Special Tool 09924-17811
3. Remove flywheel or drive plate from engine assembly.

Reverse removal procedure noting the following points

Scheme 71

1. Install new flywheel bolts or drive plate bolts.
2. Wedge a special tool in ring gear teeth to lock flywheel or drive plate as shown in figure. Special Tool 09924-17811
3. Tighten flywheel bolts or drive plate bolts to specified torque. Tightening torque Flywheel bolt (a): 70 N.m (7.1 kg-m, 52.0 lbf-ft) Drive plate bolt (a): 70 N.m (7.1 kg-m, 52.0 lbf-ft)