A/T System Check
Refer to the following items for the details of each step.
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Customer complaint analysis Perform customer complaint analysis. Was customer complaint analysis performed according to instruction? | Go to Step 2. | Perform customer complaint analysis. |
| 2 | DTC/Freeze frame data check, record and clearance Check for DTC (including pending DTC) Is there any DTC(s)? | Print DTC and freeze frame data or write them down and clear them by referring to DTC CLEARANCE . Go to Step 3. | Go to Step 4. |
| 3 | Visual inspection Perform visual inspection. Is there any faulty condition? | Repair or replace malfunction part. Go to Step 11. | Go to Step 5. |
| 4 | Visual inspection Perform visual inspection. Is there any faulty condition? | Repair or replace malfunction part. Go to Step 11. | Go to Step 8. |
| 5 | Trouble symptom confirmation Confirm trouble symptom. Is trouble symptom identified? | Go to Step 6. | Go to Step 7. |
| 6 | Rechecking and record of DTC/Freeze frame data Recheck for DTC and freeze frame data referring to DTC CHECK . Is there any DTC(s)? | Go to Step 9. | Go to Step 8. |
| 7 | Rechecking and record of DTC/Freeze frame data Recheck for DTC and freeze frame data referring to DTC CHECK . Is there any DTC(s)? | Go to Step 9. | Go to Step 10. |
| 8 | A/T basic check and A/T trouble diagnosis Check and repair according to A/T BASIC CHECK and A/T SYMPTOM DIAGNOSIS . Are check and repair complete? | Go to Step 11. | Check and repair malfunction part(s). Go to Step 11. |
| 9 | Troubleshooting for DTC Check and repair according to applicable DTC diag. flow. Are check and repair complete? | Go to Step 11. | Check and repair malfunction part(s). Go to Step 11. |
| 10 | Check for intermittent problem Check for intermittent problem. Is there any faulty condition? | Repair or replace malfunction part(s). Go to Step 11. | Go to Step 11. |
| 11 | Final confirmation test Clear DTC if any. Perform final confirmation test. Is there any problem symptom, DTC or abnormal condition? | Go to Step 6. | End. |
A/T SYSTEM CHECK - DTC TROUBLESHOOTING CHART