ENGINE BRAKE TEST
| WARNING | Before test, make sure that there is no vehicle behind so as to prevent rear-end collision. |
- While driving vehicle in 4th gear of "D" range, shift select lever down to "3" range and check if engine brake operates.
- In the same way as in Step 1 ), check engine brake for operation when select lever is shifted down to "L" range.
- Engine brake should operate in the test.
| Condition | Possible Cause | Action |
|---|---|---|
| Failure to operate when shifted down to "3" range | Faulty No. 1 brake | Inspect. If NG, replace . |
| Faulty No. 2 brake | Inspect. If NG, replace . | |
| Failure to operate when shifted down to "L" range | Faulty 1st/reverse brake | Inspect. If NG, replace . |
TROUBLESHOOTING CHART