Wheel Alignment Specifications
| Application | Front | Rear |
|---|---|---|
| Camber (2006) | 0°20'± 45' | 1°00'± 45' |
| Camber (2007) | 0.33°± 0.75° | 1.0°± 0.75° |
| Caster | 4°00'± 45' | |
| Toe-in (No person, full tank) (2006) | 0°00 ± 10' | 0°12'± 10' |
| Toe-in (No person, full tank) (2007) | 0° ± 0.17° | 0.2°± 0.17° |
WHEEL ALIGNMENT SPECIFICATIONS
General Specifications
| Application | Trim Height |
|---|---|
| Center of Front Wheel to Bottom of Front Wheel Well | 368 mm (14.4 in.) |
| Center of Rear Wheel to Bottom of Rear Wheel Well | 367 mm (14.4 in.) |
| * CONDITION: Full Fuel in the Tank | |
GENERAL SPECIFICATIONS
Tightening Torque Specifications
| Application | N.m |
|---|---|
| Ball Joint Pinch Bolt Nut | 60 |
| Ball Joint-to-Control Arm Nuts | 100 |
| Front Control Arm-to-Crossmember Bolt | 125 |
| Rear Control Arm-to-Crossmember Bolt | 110 |
| Crossmember Link-to-Transaxle Bracket Nut | 169 |
| Drive Axle-to-Hub Caulking Nut | 300 |
| Front Crossmember-to-Body Bolts | 130 |
| Piston Rod Nut | 75 |
| Rear Crossmember-to-Body Bolts | 196 |
| Stabilizer Link-to-Strut Assembly Nut | 47 |
| Stabilizer Shaft-to-Stabilizer Link Nut | 47 |
| Steering Knuckle-to-Strut Assembly Nuts/Bolts | 120 |
| Strut Assembly-to-Body Nut | 65 |
TIGHTENING TORQUE SPECIFICATIONS