General Specification
| Applied model | VQ40DE | |
|---|---|---|
| 4WD | ||
| Front | Propeller shaft model | 2F1310 |
| Number of joints | 2 | |
| Coupling method with front final drive | Flange type | |
| Coupling method with transfer | Flange type | |
| Shaft length (Spider to spider) | 696 mm (27.40 in) | |
| Shaft outer diameter | 63.5 mm (2.5 in) | |
| Journal axial play | 0.02 mm (0.0008 in) or less | |
| Propeller shaft runout limit | 0.6 mm (0.024 in) or less | |
| Propeller shaft joint flex effort | 1.96 N.m (0.20 kg-m, 17 in-lb) or less | |
GENERAL SPECIFICATION
| Applied model | VQ40DE | ||
|---|---|---|---|
| 4WD | |||
| Transmission type | 6M/T | 5A/T | |
| Grade | SE, Off-Road | SE, LE | Off-Road |
| Number of pinion joints | 2 | ||
| Coupling method with rear final drive | Flange type | ||
| Coupling method with transmission | Sleeve type | ||
| Shaft length (spider to spider) | 1239.8 (48.81 in) | 1253.8 (49.36 in) | 1239.8 (48.81 in) |
| Shaft outer diameter | 102.5 (4.00 in) | ||
GENERAL SPECIFICATION
| Applied model | QR25DE |
|---|---|
| 2WD | |
| M/T A/T | |
| Propeller shaft model | 3S1310 |
| Number of joints | 3 |
| Coupling method with rear final drive | Flange type |
| Coupling method with transmission | Sleeve type |
| 1st Shaft length (Center bearing to spider) | 741.5 mm (29.19 in) |
| 2nd Shaft length (Spider to spider) | 779.8 mm (30.70 in) |
| Shaft outer diameter | 76.2 mm (3.00 in) |
| Journal axial play | 0.02 mm (0.0008 in) or less |
| Propeller shaft runout limit | 0.6 mm (0.024 in) or less |
| Propeller shaft joint flex effort | 2.26 N.m (0.23 kg-m, 20 in-lb) or less |
GENERAL SPECIFICATION
| Applied model | VQ40DE |
|---|---|
| 2WD | |
| M/T | |
| Propeller shaft model | 3S1330 |
| Number of joints | 3 |
| Coupling method with rear final drive | Flange type |
| Coupling method with transmission | Sleeve type |
| 1st Shaft length (Center bearing to spider) | 741.5 mm (29.19 in) |
| 2nd Shaft length (Spider to spider) | 779.8 mm (30.70 in) |
| Shaft outer diameter | 76.2 mm (3.00 in) |
| Journal axial play | 0.02 mm (0.0008 in) or less |
| Propeller shaft runout limit | 0.6 mm (0.024 in) or less |
| Propeller shaft joint flex effort | 2.26 N.m (0.23 kg-m, 20 in-lb) or less |
GENERAL SPECIFICATION