Home ReviewsRefund
Home/Suzuki/Equator/Suzuki Equator I (2008-2012)/Repair manual/Body Electrical/Power Control System: Removal & Installation
Contents Wiring diagrams Section: Body Electrical All sections

Power Control System: Removal & Installation Suzuki Equator I

Body Electrical 2 illustrations

REMOVAL

  1. Disconnect negative battery terminal.

Scheme 484

Scheme 484
Scheme 484

Scheme 485

Scheme 485
Scheme 485
  1. Remove IPDM E/R upper cover.
  2. Release 2 clips and pull IPDM E/R up from case.
  3. Disconnect IPDM E/R connectors and remove the IPDM E/R.

INSTALLATION

Installation is in the reverse order of removal.

More articles — Power Control System