Home ReviewsRefund
Home/Subaru/XV/Subaru XV GP (2011-2016)/Repair manual/Ignition System/Engine Ignition System (Except Wrx): Removal & Installation
Contents Wiring diagrams Section: Ignition System All sections

Engine Ignition System (Except Wrx): Removal & Installation Subaru XV GP

Ignition System 3 illustrations ~137 words

REMOVAL

Spark plug

Refer to "SPECIFICATION" for spark plug. < Refer to SPECIFICATION , General Description. >

Scheme 4

Scheme 4: RH SIDE
Scheme 4: RH SIDE

Scheme 5

Scheme 5
Scheme 5
  1. Disconnect the ground cable from battery.
  2. Remove the air cleaner case. < Refer to «REMOVAL»(ref-560358-S34919400752013061300000) , Air Cleaner Case. >
  3. Disconnect the connector from ignition coil.
  4. Remove the ignition coil.
  5. Remove the spark plug with a spark plug socket.

Scheme 6

Scheme 6
Scheme 6
  1. Disconnect the ground cable from battery.
  2. Disconnect the connector from ignition coil.
  3. Remove the ignition coil.
  4. Remove the spark plug with a spark plug socket.

Direct ignition type is adopted. Refer to "Spark Plug" for removal procedure. < Refer to REMOVAL , Spark Plug. >

INSTALLATION

Direct ignition type is adopted. Refer to "Spark Plug" for the installation procedure. < Refer to INSTALLATION , Spark Plug. >

More articles — Engine Ignition System (Except Wrx)