Home/Subaru/SVX/Subaru SVX I (1991-1997)/Repair manual/Removal & Installation/Engine Controls - Remove/install/overhaul: Other
Contents Wiring diagrams Section: Removal & Installation All sections

Engine Controls - Remove/install/overhaul: Other Subaru SVX I

Removal & Installation 2 illustrations

DISTRIBUTOR

Note. (Scheme 5)or (Scheme 6) for exploded view of distributor.

Scheme 5

Scheme 5: DISTRIBUTOR

Scheme 6

Scheme 6

FUEL SYSTEM

WARNINGAlways relieve fuel pressure before disconnecting any fuel injection-related component. DO NOT allow fuel to contact engine or electrical components.

FUEL SYSTEM PRESSURE RELEASE

Unplug fuel pump connector. Start and run engine until it stalls. After engine stalls, operate starter for approximately 5 seconds. Turn ignition off.

INJECTORS (PFI)

CAUTIONDo not pry on injectors with a screwdriver or pinch injector pin with pliers during removal.