Home ReviewsRefund Car not listed?
Home/Subaru/Outback/Subaru Outback BS (2014-2014)/Repair manual/Transmission Control Systems/GENERAL TOOL
Contents Wiring diagrams Section: Transmission Control Systems All sections

GENERAL TOOL Subaru Outback BS

Transmission Control Systems 9 illustrations

GENERAL TOOL

TOOL NAMEREMARKS
Chain slingUsed for holding and balancing the engine unit when removing and installing the MT gear select cable. Length: 0.8 - 1 m (2.6 - 3.3 ft) Load capacity: 1.2 t (2646 lb) or more Diameter: 6 mm (0.24 in) or 6.3 mm (0.25 in) Chain external width: 23.5 mm (0.93 in) or less Chain internal width: 8.5 mm (0.33 in) or more
Screw shackleUsed for holding and balancing the engine unit when removing and installing the MT gear select cable. Load capacity: 250 kg (551 lb) or more Use two pieces.
Circuit testerUsed for measuring resistance and voltage.

Scheme 728

Scheme 728: MODEL WITHOUT PUSH BUTTON IGNITION SWITCH
Scheme 728: MODEL WITHOUT PUSH BUTTON IGNITION SWITCH

Scheme 729

Scheme 729
Scheme 729

Scheme 730

Scheme 730: MODEL WITH PUSH BUTTON IGNITION SWITCH
Scheme 730: MODEL WITH PUSH BUTTON IGNITION SWITCH

Scheme 731

Scheme 731
Scheme 731

Scheme 732

Scheme 732: ELECTRICAL SPECIFICATION
Scheme 732: ELECTRICAL SPECIFICATION
ItemConnector No.Terminal No.Input/Output signal
Measured value and measuring conditions
Battery power supplyB28169 - 16 V
I846
Ignition power supplyI171179 - 16 V when ignition switch is at ON or START.
259 - 16 V when ignition switch is at ACC.
TCM ("P" range)B28120Pulse signal (CAN communication)
28
Stop light switchB280109 - 16 V when stop light switch is ON. Less than 1.5 V when stop light switch is OFF.
"P" range switchB28121Less than 1.5 V when select lever is in "P" range. 9 - 16 V when select lever is in other positions than "P" range.
Solenoid unit outputB28158.5 - 16 V when shift lock is released. Less than 1.5 V when shift lock is operating.
Key warning switch signal (Model without push button ignition switch)B28049 - 16 V when key is inserted. Less than 1.5 V when key is removed.
Key lock solenoid output (Model without push button ignition switch)B28137 - 14 V (unlock) (1)
47 - 14 V (lock) (1)
GroundB28011 V or less
B28131
I841
I17129
(1) Measuring condition
(1)Measuring condition
Key warning switch"P" range switchIgnition switchOutput
OFFUnlock (Key can be removed)
ONOFFLock (Key cannot be removed)
ONONOFFUnlock
ONONONLock

Scheme 733

Scheme 733: Key lock solenoid output signal
Scheme 733: Key lock solenoid output signal

Scheme 734

Scheme 734
Scheme 734
  1. Output Signal for Unlock
  2. Output Signal for Lock

Scheme 735

Scheme 735: MODEL WITHOUT PUSH BUTTON IGNITION SWITCH
Scheme 735: MODEL WITHOUT PUSH BUTTON IGNITION SWITCH

Scheme 736

Scheme 736: MODEL WITH PUSH BUTTON IGNITION SWITCH
Scheme 736: MODEL WITH PUSH BUTTON IGNITION SWITCH