Home/Subaru/Outback/Subaru Outback BS (2014-2014)/Repair manual/Seat System - Seats/CONDITIONS FOR INITIALIZATION

Contents

Wiring diagrams Section: Seat System - Seats

CAUTION

GENERAL TOOL

DRIVER SEAT (MANUAL SEAT)

DRIVER SEAT (POWER SEAT)

PASSENGER'S SEAT

SEAT COVER

FLAT MAT HOOK

Reclining cable (OUTBACK model)

Backrest cable (OUTBACK model)

CHECK POWER SEAT SWITCH

CHECK LUMBAR SWITCH

CHECK MEMORY SWITCH (WITH MEMORY FUNCTION)

ALL FUNCTIONS DO NOT OPERATE (WITHOUT MEMORY)

SOME MOTORS DO NOT OPERATE (WITHOUT MEMORY)

SOME MOTORS DO NOT OPERATE (WITH MEMORY)

UNABLE TO SET POSITIONS INTO MEMORY (WITH MEMORY)

NO INTERLOCK WITH SMART KEYLESS

UNABLE TO PERFORM INITIALIZATION

CONDITIONS FOR INITIALIZATION

INITIALIZATION PROCEDURES

CHECK SEAT HEATER FUSE

CHECK SEAT HEATER RELAY

CHECK SEAT HEATER SWITCH

CHECK POWER SUPPLY AND GROUND CIRCUIT

All sections

CONDITIONS FOR INITIALIZATION Subaru Outback BS

Seat System - Seats

CONDITIONS FOR INITIALIZATION

The power seat control module must be initialized if the following conditions are met.

The seat is removed from vehicle.
Power seat control module is replaced.
Slide rail assembly or backrest frame assembly is removed or replaced.
Pulse generated when seat is moved do not match with the amount of actual travel. (When memory is not correctly reloaded.)